Antimony
Synonyms: Antimony powder, Antimony metal
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Chemical Name
Antimony
Product Form
Substance
Catalogue No.
AL0463
CAS Number
7440-36-0
EC Number
231-146-5
EC Index Number
-
Grade
99%
HSN Code
81101000
Molecular Formula
Sb
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
Chemical Name
Antimony
Catalogue No.
AL0463
Product form
Substance
CAS Number
7440-36-0
EC Number
231-146-5
Grade
99%
EC Index Number
Not specified
Chemical Formula
Sb
HSN Code
81101000
Synonyms
Antimony powder, Antimony metal
Chemical Structure
-
1.2 Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture
Used in alloy production and as a precursor for antimony compounds.
Uses advised against
Not specified
1.3 Details of the supplier of the safety data sheet
Company identification
Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 Emergency Contact Details
Phone / e-Mail
Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Not classified as hazardous (majority of notifications to the ECHA C&L Inventory)
Classification source
ECHA C&L Inventory via PubChem CID 5354495 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements
2.2 Label elements
Hazard pictograms
None required
Signal word
None
Hazard statements
None
2.3 Other hazards
Other hazards
May cause respiratory irritation and skin irritation.
SECTION 3: Composition/information on ingredients
3.1 Substance
Name
Antimony
CAS No.
7440-36-0
SECTION 4: First aid measures
4.1 Description of first aid measures
First-aid measures after inhalation
If this chemical has been inhaled, remove the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the person warm and at rest.
First-aid measures after skin contact
If this chemical contacts the skin, immediately wash the contaminated skin with soap and water. If this chemical penetrates the clothing, immediately remove the clothing, wash the skin with soap and water, and get medical attention promptly.
First-aid measures after eye contact
If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.
First-aid measures after ingestion
If this chemical has been swallowed, get medical attention immediately.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms relating to use
Irritation of the respiratory tract, skin, and eyes.
4.3 Indication of any immediate medical attention and special treatment needed
General information
Treat symptomatically. Show this safety data sheet to the treating physician.
SECTION 5: Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Advice for firefighters: Wear self-contained breathing apparatus for firefighting if necessary.
Unsuitable extinguishing media
Not specified
5.2 Special hazards arising from the substance or mixture
Special procedures
Dust explosion possible if in powder or granular form, mixed with air.
5.3 Advice for firefighters
Protection during firefighting
Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1.1 For non-emergency personnel
Emergency procedures
Avoid dust formation. Use appropriate personal protective equipment.
6.3 Methods and material for containment and cleaning up
Methods for cleaning up
Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Sweep spilled substance into covered sealable containers. If appropriate, moisten first to prevent dusting.
6.4 Reference to other sections
Reference
Not specified
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Precautions for safe handling
Avoid inhalation of dust and contact with skin. Use in a well-ventilated area.
Hygiene measures
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 Conditions for safe storage, including any incompatibilities
Storage conditions
Separated from oxidants, acids, halogens and food and feedstuffs.
SECTION 8: Exposure controls/personal protection
8.2 Exposure controls
Hand protection
Handle with gloves.
Eye protection
Safety glasses with side-shields conforming to EN166. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin and body protection
Wear suitable protective clothing
Respiratory protection
Use appropriate respiratory protection if dust is generated.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Physical state
Solid
Colour
Gray
Odour
Odourless
Odour threshold
Not applicable
pH value
Not applicable
Relative evaporation rate (butylacetate=1)
Not applicable
Melting point
630.028 °C (gray antimony); trans gray 0 (black antimony)
Freezing point
Not applicable
Boiling point
1587 °C
Flash point
Not applicable
Auto-ignition temperature
Not applicable
Decomposition temperature
Not applicable
Flammability (solid, gas)
Not flammable under normal conditions
Vapour pressure
1 mm Hg at 886 °C
Relative vapour density at 20°C
Not applicable
Density
6.68 g/cu cm at 20 °C
Solubility
Insoluble in water
Log Pow
Not applicable
Viscosity, kinematic
Not applicable
Viscosity, dynamic
Not applicable
Explosive properties
Dust may form explosive mixtures in air
Oxidising properties
Not oxidizing
Explosive limits
Not applicable
SECTION 10: Stability and reactivity
10.1 Reactivity
Reactivity
Stable under normal conditions, but may react with strong oxidizers.
10.2 Chemical stability
Chemical stability
Slightly oxidized in air.
10.3 Possibility of hazardous reactions
Possibility of hazardous reactions
On combustion, forms toxic fumes of antimony oxides (see ICSC 0012). Reacts violently with oxidants, acids, halogens and powdered metals. This generates fire and explosion hazard.
10.4 Conditions to avoid
Conditions to avoid
Avoid contact with incompatible materials and excessive heat.
10.5 Incompatible materials
Incompatible materials
Strong oxidizers, halogens.
10.6 Hazardous decomposition products
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Antimony oxide.
SECTION 11: Toxicological information
11.1 Information on toxicological effects
Acute toxicity
LD50 Rat oral 7 g/kg; LD50 Rat i.p. 100 mg/kg; LD50 Mice i.p. 90 mg/kg
Skin corrosion/irritation
Not classified (based on available data)
Serious eye damage/irritation
Not classified (based on available data)
Respiratory or skin sensitisation
Not classified (based on available data)
Germ cell mutagenicity
Not classified (based on available data)
Carcinogenicity
Not classified (based on available data)
Specific target organ toxicity (single exposure)
Not classified (based on available data)
Specific target organ toxicity (repeated exposure)
Not classified (based on available data)
SECTION 12: Ecological information
12.1 Toxicity
Toxicity information
Not specified
12.2 Persistence - degradability
Persistence - degradability
Not specified
12.3 Bioaccumulative potential
Bioaccumulative potential
Not specified
12.4 Mobility in soil
Mobility in soil
Not specified
12.6 Other adverse effects
Environmental precautions
Not specified
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Additional Info
Dispose of contents/container in accordance with local, regional, national and international regulations.
SECTION 14: Transport information
14.1 UN number
UN-No. (ADR)
Not assigned
UN-No. (IMDG)
Not assigned
UN-No. (IATA)
Not assigned
UN-No. (ADN)
Not assigned
UN-No. (RID)
Not assigned
14.2 UN proper shipping name
Proper Shipping Name (ADR)
Antimony powder
Proper Shipping Name (IMDG)
Antimony powder
Proper Shipping Name (IATA)
Antimony powder
Proper Shipping Name (ADN)
Antimony powder
Proper Shipping Name (RID)
Antimony powder
14.3 Transport hazard class(es)
Transport hazard class(es)
Not classified as hazardous for transport
14.4 Packing group
Packing group (ADR)
Not applicable
Packing group (IMDG)
Not applicable
Packing group (IATA)
Not applicable
Packing group (ADN)
Not applicable
Packing group (RID)
Not applicable
14.5 Environmental hazards
Dangerous for the environment
Not specified
Marine pollutant
Not specified
Other information
No supplementary information available
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
15.1.1 EU-Regulations
Not specified
SECTION 16: Other Information
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a guarantee or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.