Safety Data Sheet - Isobutyl methyl ketone

SECTION 1: Identification of the substance/mixture and of the company/undertaking

Chemical Name Isobutyl methyl ketone

Product Form Substance

Catalogue No. AL0994

CAS Number 108-10-1

EC Number 203-550-1

EC Index Number 606-002-00-3

Grade 99%

HSN Code 29141300

Molecular Formula C6H12O

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1 Product identifier

Chemical Name Isobutyl methyl ketone

Catalogue No. AL0994

Product form Substance

CAS Number 108-10-1

EC Number 203-550-1

Grade 99%

EC Index Number 606-002-00-3

Chemical Formula C6H12O

HSN Code 29141300

Synonyms Methyl isobutyl ketone, MIBK

Chemical Structure -

1.2 Relevant identified uses of the substance or mixture and uses advised against

Use of the substance/mixture Industrial solvent, extraction solvent

Uses advised against Not specified

1.3 Details of the supplier of the safety data sheet

Company identification Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.

1.4 Emergency Contact Details

Phone / e-Mail Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Classification according to Regulation (EC) No 1272/2008 Flam. Liq. 2; Eye Irrit. 2; Acute Tox. 4; STOT SE 3

Classification source ECHA C&L Inventory via PubChem CID 7909 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements

2.2 Label elements

Hazard pictograms Flammable, Irritant

Signal word Danger

Hazard statements H225: Highly Flammable liquid and vapor; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation

2.3 Other hazards

Other hazards Vapor may cause drowsiness or dizziness.

SECTION 3: Composition/information on ingredients

3.1 Substance

Name Isobutyl methyl ketone

CAS No. 108-10-1

SECTION 4: First aid measures

4.1 Description of first aid measures

First-aid measures after inhalation If this chemical has been inhaled, remove the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the person warm and at rest.

First-aid measures after skin contact If this chemical contacts the skin, flush the contaminated skin with water promptly. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water promptly. If irritation persists after washing, get medical attention.

First-aid measures after eye contact If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.

First-aid measures after ingestion If this chemical has been swallowed, get medical attention immediately.

4.2 Most important symptoms and effects, both acute and delayed

Symptoms relating to use Headache, dizziness, nausea, irritation of eyes and skin.

4.3 Indication of any immediate medical attention and special treatment needed

General information Treat symptomatically. Show this safety data sheet to the treating physician.

SECTION 5: Fire-fighting measures

5.1 Extinguishing media

Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Unsuitable extinguishing media Not specified

5.2 Special hazards arising from the substance or mixture

Special procedures Hazardous decomposition products formed under fire conditions: Carbon oxides, Oxides of phosphorus.

5.3 Advice for firefighters

Protection during firefighting Do not enter fire area without proper protective equipment, including respiratory protection.

SECTION 6: Accidental release measures

6.1.1 For non-emergency personnel

Emergency procedures Evacuate area and eliminate all ignition sources. Ventilate area.

6.3 Methods and material for containment and cleaning up

Methods for cleaning up Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Ventilation. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent.

6.4 Reference to other sections

Reference Not specified

SECTION 7: Handling and storage

7.1 Precautions for safe handling

Precautions for safe handling Use in a well-ventilated area. Avoid contact with skin and eyes.

Hygiene measures Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.

7.2 Conditions for safe storage, including any incompatibilities

Storage conditions Fireproof. Separated from strong oxidants. Well closed.

SECTION 8: Exposure controls/personal protection

8.2 Exposure controls

Hand protection Handle with gloves.

Eye protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin and body protection Wear suitable protective clothing

Respiratory protection Use appropriate respiratory protection if ventilation is inadequate.

SECTION 9: Physical and chemical properties

9.1 Information on basic physical and chemical properties

Physical state Liquid

Colour Colorless

Odour Pleasant odor

Odour threshold Not specified

pH value Not applicable

Relative evaporation rate (butylacetate=1) 0.8

Melting point -85 °C

Freezing point Not specified

Boiling point 115.7 °C

Flash point 64 °F (18 °C) (Closed cup)

Auto-ignition temperature 840 °F (448 °C)

Decomposition temperature Not specified

Flammability (solid, gas) Flammable liquid

Vapour pressure 19.9 mm Hg at 25 °C

Relative vapour density at 20°C 3.45 (Air = 1)

Density 0.7965 g/cu cm at 25 °C

Solubility Miscible with water, ethanol, and ether

Log Pow 1.31

Viscosity, kinematic Not specified

Viscosity, dynamic Not specified

Explosive properties Not explosive

Oxidising properties Not oxidizing

Explosive limits 1.1 - 7.0% (v/v) in air

SECTION 10: Stability and reactivity

10.1 Reactivity

Reactivity Stable under normal conditions. Avoid strong oxidizing agents.

10.2 Chemical stability

Chemical stability May form peroxides of unknown stability. Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions

Possibility of hazardous reactions The substance can form explosive peroxides on exposure to air. Reacts violently with strong oxidants and strong reducing agents.

10.4 Conditions to avoid

Conditions to avoid Avoid contact with incompatible materials and excessive heat.

10.5 Incompatible materials

Incompatible materials Strong oxidizing agents, strong acids, and bases.

10.6 Hazardous decomposition products

Hazardous decomposition products Not specified

SECTION 11: Toxicological information

11.1 Information on toxicological effects

Acute toxicity LD50 Guinea pig oral 1600 mg/kg; LD50 Rat dermal >= 2000 mgkg bw; LD50 Mouse ip 590 mg/kg bw

Skin corrosion/irritation Not classified (based on available data)

Serious eye damage/irritation H319: Causes serious eye irritation

Respiratory or skin sensitisation Not classified (based on available data)

Germ cell mutagenicity Not classified (based on available data)

Carcinogenicity Not classified (based on available data)

Specific target organ toxicity (single exposure) H335: May cause respiratory irritation

Specific target organ toxicity (repeated exposure) Not classified (based on available data)

SECTION 12: Ecological information

12.1 Toxicity

Toxicity information Not specified

12.2 Persistence - degradability

Persistence - degradability Not specified

12.3 Bioaccumulative potential

Bioaccumulative potential Not specified

12.4 Mobility in soil

Mobility in soil Not specified

12.6 Other adverse effects

Environmental precautions Not specified

SECTION 13: Disposal considerations

13.1 Waste treatment methods

Additional Info Dispose of contents/container in accordance with local, regional, national and international regulations.

SECTION 14: Transport information

14.1 UN number

UN-No. (ADR) UN 1245

UN-No. (IMDG) UN 1245

UN-No. (IATA) UN 1245

UN-No. (ADN) UN 1245

UN-No. (RID) UN 1245

14.2 UN proper shipping name

Proper Shipping Name (ADR) Isobutyl methyl ketone

Proper Shipping Name (IMDG) Isobutyl methyl ketone

Proper Shipping Name (IATA) Isobutyl methyl ketone

Proper Shipping Name (ADN) Isobutyl methyl ketone

Proper Shipping Name (RID) Isobutyl methyl ketone

14.3 Transport hazard class(es)

Transport hazard class(es) 3

14.4 Packing group

Packing group (ADR) II

Packing group (IMDG) II

Packing group (IATA) II

Packing group (ADN) II

Packing group (RID) II

14.5 Environmental hazards

Dangerous for the environment Not specified

Marine pollutant Not specified

Other information No supplementary information available

SECTION 15: Regulatory information

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture

15.1.1 EU-Regulations Not specified

SECTION 16: Other Information

Disclaimer The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a guarantee or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.