Ferric Chloride Anhydrous
Synonyms: Iron(III) chloride, Ferric trichloride
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Chemical Name
Ferric Chloride Anhydrous
Product Form
Substance
Catalogue No.
AL2153
CAS Number
7705-08-0
EC Number
231-729-4
EC Index Number
017-002-00-2
Grade
AR (Analytical Reagent)
HSN Code
28274190
Molecular Formula
FeCl3
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
Chemical Name
Ferric Chloride Anhydrous
Catalogue No.
AL2153
Product form
Substance
CAS Number
7705-08-0
EC Number
231-729-4
Grade
AR (Analytical Reagent)
EC Index Number
017-002-00-2
Chemical Formula
FeCl3
HSN Code
28274190
Synonyms
Iron(III) chloride, Ferric trichloride
Chemical Structure
-
1.2 Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture
Analytical reagent, catalyst, coagulant
Uses advised against
Not specified
1.3 Details of the supplier of the safety data sheet
Company identification
Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 Emergency Contact Details
Phone / e-Mail
Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute Tox. 4; Skin Corr. 1; Aquatic Chronic 3
Classification source
ECHA C&L Inventory via PubChem CID 24380 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements
2.2 Label elements
Hazard pictograms
Corrosive, Irritant
Signal word
Danger
Hazard statements
H302: Harmful if swallowed; H314: Causes severe skin burns and eye damage; H412: Harmful to aquatic life with long lasting effects
2.3 Other hazards
Other hazards
Corrosive to metals; may cause severe skin burns and eye damage.
SECTION 3: Composition/information on ingredients
3.1 Substance
Name
Ferric Chloride Anhydrous
CAS No.
7705-08-0
SECTION 4: First aid measures
4.1 Description of first aid measures
First-aid measures after inhalation
Move to fresh air. If breathing is difficult, give oxygen. Seek medical attention.
First-aid measures after skin contact
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water.
First-aid measures after eye contact
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center.
First-aid measures after ingestion
Rinse mouth. Do NOT induce vomiting. Seek medical attention immediately.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms relating to use
Burning sensation, coughing, wheezing, shortness of breath, redness, and pain in skin or eyes.
4.3 Indication of any immediate medical attention and special treatment needed
General information
Treat symptomatically. Show this safety data sheet to the treating physician.
SECTION 5: Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
Water spray, carbon dioxide, dry chemical powder, foam.
Unsuitable extinguishing media
Not specified
5.2 Special hazards arising from the substance or mixture
Special procedures
Non-flammable, but may emit toxic fumes in a fire.
5.3 Advice for firefighters
Protection during firefighting
Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1.1 For non-emergency personnel
Emergency procedures
Contain spill and prevent entry into waterways. Use appropriate protective equipment.
6.3 Methods and material for containment and cleaning up
Methods for cleaning up
Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Do NOT let this chemical enter the environment. Sweep spilled substance into covered plastic containers. If appropriate, moisten first to prevent dusting.
6.4 Reference to other sections
Reference
Not specified
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Precautions for safe handling
Avoid contact with skin and eyes. Use personal protective equipment as required.
Hygiene measures
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 Conditions for safe storage, including any incompatibilities
Storage conditions
Separated from strong bases and incompatible materials. See Chemical Dangers. Dry. Well closed.
SECTION 8: Exposure controls/personal protection
8.2 Exposure controls
Hand protection
Protective gloves (e.g. nitrile rubber)
Eye protection
Chemical safety goggles or safety glasses
Skin and body protection
Wear suitable protective clothing
Respiratory protection
Use appropriate respiratory protection if ventilation is inadequate.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Physical state
Solid
Colour
Dark green to black
Odour
Odourless
Odour threshold
Not applicable
pH value
Not applicable
Relative evaporation rate (butylacetate=1)
Not applicable
Melting point
304 °C
Freezing point
Not applicable
Boiling point
About 316 °C
Flash point
Not applicable
Auto-ignition temperature
Not applicable
Decomposition temperature
Not applicable
Flammability (solid, gas)
Not flammable
Vapour pressure
VP: 1 mm Hg at 194.0 °C
Relative vapour density at 20°C
Not applicable
Density
2.90 at 25 °C
Solubility
Soluble in water, forming a yellow-brown solution
Log Pow
Not applicable
Viscosity, kinematic
Not applicable
Viscosity, dynamic
Not applicable
Explosive properties
Not explosive
Oxidising properties
Not oxidizing
Explosive limits
Not applicable
SECTION 10: Stability and reactivity
10.1 Reactivity
Reactivity
Reacts with water to form hydrochloric acid and ferric hydroxide.
10.2 Chemical stability
Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
Possibility of hazardous reactions
Decomposes above 200 °C . This produces toxic and corrosive gases including chlorine and hydrogen chloride. Decomposes on contact with water. This produces hydrogen chloride.
10.4 Conditions to avoid
Conditions to avoid
Avoid contact with incompatible materials and excessive heat.
10.5 Incompatible materials
Incompatible materials
Strong bases, strong oxidizers, moisture.
10.6 Hazardous decomposition products
Hazardous decomposition products
When heated to decomposition it emits highly toxic fumes of hydrogen chloride.
SECTION 11: Toxicological information
11.1 Information on toxicological effects
Acute toxicity
LD50 Mouse oral 450 mg/kg; LD50 Mouse iv 49 mg iron/kg; LD50 Rat ingestion 0.5-5 g/kg
Skin corrosion/irritation
H314: Causes severe skin burns and eye damage
Serious eye damage/irritation
Not classified (based on available data)
Respiratory or skin sensitisation
Not classified (based on available data)
Germ cell mutagenicity
Not classified (based on available data)
Carcinogenicity
Not classified (based on available data)
Specific target organ toxicity (single exposure)
Not classified (based on available data)
Specific target organ toxicity (repeated exposure)
Not classified (based on available data)
SECTION 12: Ecological information
12.1 Toxicity
Toxicity information
Not specified
12.2 Persistence - degradability
Persistence - degradability
Not specified
12.3 Bioaccumulative potential
Bioaccumulative potential
Not specified
12.4 Mobility in soil
Mobility in soil
Not specified
12.6 Other adverse effects
Environmental precautions
Not specified
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Additional Info
Dispose of contents/container in accordance with local, regional, national and international regulations.
SECTION 14: Transport information
14.1 UN number
UN-No. (ADR)
1773
UN-No. (IMDG)
1773
UN-No. (IATA)
1773
UN-No. (ADN)
1773
UN-No. (RID)
1773
14.2 UN proper shipping name
Proper Shipping Name (ADR)
Ferric Chloride, Anhydrous
Proper Shipping Name (IMDG)
Ferric Chloride, Anhydrous
Proper Shipping Name (IATA)
Ferric Chloride, Anhydrous
Proper Shipping Name (ADN)
Ferric Chloride, Anhydrous
Proper Shipping Name (RID)
Ferric Chloride, Anhydrous
14.3 Transport hazard class(es)
Transport hazard class(es)
8
14.4 Packing group
Packing group (ADR)
III
Packing group (IMDG)
III
Packing group (IATA)
III
Packing group (ADN)
III
Packing group (RID)
III
14.5 Environmental hazards
Dangerous for the environment
Not specified
Marine pollutant
Not specified
Other information
No supplementary information available
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
15.1.1 EU-Regulations
Not specified
SECTION 16: Other Information
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a guarantee or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.