Selenium disulfide
Synonyms: Selenium sulfide
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Chemical Name
Selenium disulfide
Product Form
Substance
Catalogue No.
AL3968
CAS Number
7488-56-4
EC Number
231-303-8
EC Index Number
-
Grade
95%
HSN Code
28309010
Molecular Formula
SeS2
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
Chemical Name
Selenium disulfide
Catalogue No.
AL3968
Product form
Substance
CAS Number
7488-56-4
EC Number
231-303-8
Grade
95%
EC Index Number
Not specified
Chemical Formula
SeS2
HSN Code
28309010
Synonyms
Selenium sulfide
Chemical Structure
-
1.2 Relevant identified uses of the substance or mixture and uses advised against
Use of the substance/mixture
Topical antifungal agent
Uses advised against
Not specified
1.3 Details of the supplier of the safety data sheet
Company identification
Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 Emergency Contact Details
Phone / e-Mail
Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute Tox. 3; STOT RE 2; Aquatic Acute 1; Aquatic Chronic 1
Classification source
ECHA C&L Inventory via PubChem CID 24087 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements
2.2 Label elements
Hazard pictograms
Acute Toxic, Health Hazard, Environmental Hazard
Signal word
Danger
Hazard statements
H301: Toxic if swallowed; H331: Toxic if inhaled; H373: May causes damage to organs through prolonged or repeated exposure; H400: Very toxic to aquatic life; H410: Very toxic to aquatic life with long lasting effects
2.3 Other hazards
Other hazards
Highly toxic; handle with care.
SECTION 3: Composition/information on ingredients
3.1 Substance
Name
Selenium disulfide
CAS No.
7488-56-4
SECTION 4: First aid measures
4.1 Description of first aid measures
First-aid measures after inhalation
Move to fresh air. Seek medical attention if symptoms persist.
First-aid measures after skin contact
IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water.
First-aid measures after eye contact
First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center.
First-aid measures after ingestion
Do not induce vomiting. Rinse mouth and seek medical attention immediately.
4.2 Most important symptoms and effects, both acute and delayed
Symptoms relating to use
Symptoms of exposure may include respiratory distress, skin irritation, and eye irritation.
4.3 Indication of any immediate medical attention and special treatment needed
General information
Treat symptomatically. Show this safety data sheet to the treating physician.
SECTION 5: Fire-fighting measures
5.1 Extinguishing media
Suitable extinguishing media
Water spray, carbon dioxide, dry chemical powder, foam.
Unsuitable extinguishing media
Not specified
5.2 Special hazards arising from the substance or mixture
Special procedures
May emit toxic fumes in a fire. Use appropriate fire-fighting measures.
5.3 Advice for firefighters
Protection during firefighting
Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1.1 For non-emergency personnel
Emergency procedures
Evacuate area and ventilate. Wear appropriate protective equipment.
6.3 Methods and material for containment and cleaning up
Methods for cleaning up
Contain spill and collect using appropriate methods. Dispose of in accordance with local regulations.
6.4 Reference to other sections
Reference
Not specified
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Precautions for safe handling
Use personal protective equipment (PPE) such as gloves and masks. Avoid contact with skin and eyes.
Hygiene measures
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 Conditions for safe storage, including any incompatibilities
Storage conditions
Selenium sulfide lotion should be protected from heat. The lotion should be stored in a tight container at temperature less than 40 °C, preferably between 15 to 30 °C; freezing should be avoided.
SECTION 8: Exposure controls/personal protection
8.2 Exposure controls
Hand protection
Protective gloves (e.g. nitrile rubber)
Eye protection
Chemical safety goggles or safety glasses
Skin and body protection
Wear suitable protective clothing
Respiratory protection
Use a respirator if exposure limits are exceeded or if irritation occurs.
SECTION 9: Physical and chemical properties
9.1 Information on basic physical and chemical properties
Physical state
Solid
Colour
Orange-red to brown
Odour
Odourless
Odour threshold
Not specified
pH value
Not applicable
Relative evaporation rate (butylacetate=1)
Not applicable
Melting point
<100 °C
Freezing point
Not applicable
Boiling point
400 °C
Flash point
Not applicable
Auto-ignition temperature
Not applicable
Decomposition temperature
Not specified
Flammability (solid, gas)
Not flammable
Vapour pressure
Low
Relative vapour density at 20°C
Not specified
Density
2.03 g/cm³
Solubility
Practically insoluble in water and organic solvents
Log Pow
Not specified
Viscosity, kinematic
Not applicable
Viscosity, dynamic
Not specified
Explosive properties
Not explosive
Oxidising properties
Not oxidizing
Explosive limits
Not applicable
SECTION 10: Stability and reactivity
10.1 Reactivity
Reactivity
Stable under normal conditions, but may react with strong acids and bases.
10.2 Chemical stability
Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
Possibility of hazardous reactions
No dangerous reactions known under normal conditions of use.
10.4 Conditions to avoid
Conditions to avoid
Avoid contact with incompatible materials and excessive heat.
10.5 Incompatible materials
Incompatible materials
Strong acids and bases, oxidizing agents.
10.6 Hazardous decomposition products
Hazardous decomposition products
When heated to decomposition, it emits very toxic fumes of sulfur oxides and selenium.
SECTION 11: Toxicological information
11.1 Information on toxicological effects
Acute toxicity
LD50 Rat oral 138 mg/kg; LD50 Mouse oral 370 mg/kg
Skin corrosion/irritation
Not classified (based on available data)
Serious eye damage/irritation
Not classified (based on available data)
Respiratory or skin sensitisation
Not classified (based on available data)
Germ cell mutagenicity
Not classified (based on available data)
Carcinogenicity
Not classified (based on available data)
Specific target organ toxicity (single exposure)
Not classified (based on available data)
Specific target organ toxicity (repeated exposure)
H373: May causes damage to organs through prolonged or repeated exposure
SECTION 12: Ecological information
12.1 Toxicity
Toxicity information
Not specified
12.2 Persistence - degradability
Persistence - degradability
Not specified
12.3 Bioaccumulative potential
Bioaccumulative potential
Not specified
12.4 Mobility in soil
Mobility in soil
Not specified
12.6 Other adverse effects
Environmental precautions
Not specified
SECTION 13: Disposal considerations
13.1 Waste treatment methods
Additional Info
Dispose of contents/container in accordance with local, regional, national and international regulations.
SECTION 14: Transport information
14.1 UN number
UN-No. (ADR)
2657
UN-No. (IMDG)
2657
UN-No. (IATA)
2657
UN-No. (ADN)
2657
UN-No. (RID)
2657
14.2 UN proper shipping name
Proper Shipping Name (ADR)
Selenium disulfide
Proper Shipping Name (IMDG)
Selenium disulfide
Proper Shipping Name (IATA)
Selenium disulfide
Proper Shipping Name (ADN)
Selenium disulfide
Proper Shipping Name (RID)
Selenium disulfide
14.3 Transport hazard class(es)
Transport hazard class(es)
6.1
14.4 Packing group
Packing group (ADR)
II
Packing group (IMDG)
II
Packing group (IATA)
II
Packing group (ADN)
II
Packing group (RID)
II
14.5 Environmental hazards
Dangerous for the environment
Not specified
Marine pollutant
Not specified
Other information
No supplementary information available
SECTION 15: Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
15.1.1 EU-Regulations
Not specified
SECTION 16: Other Information
Disclaimer
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a guarantee or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.