Bisphenol-A
- CAS Number
- 80-05-7
- HSN Code
- 29071190
- Molecular Formula
- C15H16O2
- Catalogue Number
- AL0752
- Purity
- ≥ 97%
- Molecular Weight
- 228.29 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
Bisphenol A is a bisphenol that is 4,4'-methanediyldiphenol in which the methylene hydrogens are replaced by two methyl groups. It has a role as an endocrine disruptor, a xenobiotic, a xenoestrogen and an environmental contaminant.
Also known as 4,4'-isopropylidenediphenol.
- Catalogue No.
- AL0752
- CAS Number
- 80-05-7
- Molecular Formula
- C15H16O2
- Molecular Weight
- 228.29 g/mol
- HSN Code
- 29071190
- Grade
- 97%
- Product Form
- Substance
Melting point: 160 °C; Boiling point: 360.5 °C at 760 mm Hg; Flash point: 227 °C (closed cup); Density: 1.195 at 25 °C/25 °C; Solubility: In water, 300 mg/L at 25 °C.
- Appearance
- Crystallizes as prisms from dil acetic acid and as needles from water
- Shelf Life
- -
- Packaging
- Available in: 500 gm plastic bottle
- Storage
- Separated from acid anhydrides, acid chlorides, strong oxidants, strong bases and food and feedstuffs. Store in an area without drain or sewer access.
1.1 — Product identifier
- Chemical Name
- Bisphenol-A
- Catalogue No.
- AL0752
- Product form
- Substance
- CAS Number
- 80-05-7
- EC Number
- 201-245-8
- Grade
- 97%
- EC Index Number
- 604-030-00-0
- Chemical Formula
- C15H16O2
- HSN Code
- 29071190
- Synonyms
- 4,4'-isopropylidenediphenol
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Used in the production of polycarbonate plastics and epoxy resins.
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.1 — Classification of the substance or mixture
- Classification according to Regulation (EC) No 1272/2008
- Skin Sens. 1; Eye Dam. 1; STOT SE 3; Repr. 2
- Classification source
- ECHA C&L Inventory via PubChem CID 6623 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements
2.2 — Label elements
- Hazard pictograms
- Corrosive, Irritant, Health Hazard
- Signal word
- Danger
- Hazard statements
- H317: May cause an allergic skin reaction; H318: Causes serious eye damage; H335: May cause respiratory irritation; H361: Suspected of damaging fertility or the unborn child
2.3 — Other hazards
- Other hazards
- Suspected endocrine disruptor; handle with care.
3.1 — Substance
- Name
- Bisphenol-A
- CAS No.
- 80-05-7
4.1 — Description of first aid measures
- First-aid measures after inhalation
- Move to fresh air. If symptoms persist, seek medical attention.
- First-aid measures after skin contact
- IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water.
- First-aid measures after eye contact
- First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center.
- First-aid measures after ingestion
- Rinse mouth. Do not induce vomiting. Seek medical attention if symptoms occur.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- Irritation of skin, eyes, and respiratory tract; potential endocrine disruption.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- Containers may explode in fire.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Contain spill and prevent entry into waterways. Use appropriate protective equipment.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Do NOT let this chemical enter the environment. Sweep spilled substance into sealable containers. If appropriate, moisten first to prevent dusting.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Avoid prolonged skin contact; use gloves and protective clothing.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Separated from acid anhydrides, acid chlorides, strong oxidants, strong bases and food and feedstuffs. Store in an area without drain or sewer access.
8.2 — Exposure controls
- Hand protection
- Handle with gloves.
- Eye protection
- Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Use in a well-ventilated area; use respiratory protection if necessary.
9.1 — Information on basic physical and chemical properties
- Physical state
- Solid
- Colour
- White to pale yellow
- Odour
- Mild phenolic odor
- Odour threshold
- Not specified
- pH value
- Not applicable
- Relative evaporation rate (butylacetate=1)
- Not specified
- Melting point
- 160 °C
- Freezing point
- Not specified
- Boiling point
- 360.5 °C at 760 mm Hg
- Flash point
- 227 °C (closed cup)
- Auto-ignition temperature
- 510-570 °C
- Decomposition temperature
- Not specified
- Flammability (solid, gas)
- Flammable solid
- Vapour pressure
- 4.0X10-8 mm Hg at 25 °C
- Relative vapour density at 20°C
- Not specified
- Density
- 1.195 at 25 °C/25 °C
- Solubility
- In water, 300 mg/L at 25 °C
- Log Pow
- 3.32
- Viscosity, kinematic
- Not specified
- Viscosity, dynamic
- Not specified
- Explosive properties
- Not explosive
- Oxidising properties
- Not oxidizing
- Explosive limits
- Not specified
10.1 — Reactivity
- Reactivity
- Stable under normal conditions; avoid strong oxidizing agents.
10.2 — Chemical stability
- Chemical stability
- Stable under recommended storage conditions.
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- Reacts violently with strong oxidants. This generates fire and explosion hazard. Reacts vigorously with acid anhydrides, acid chlorides and strong bases.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong oxidizing agents, strong acids, and bases.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- Hazardous decomposition products formed under fire conditions - Carbon oxides.
11.1 — Information on toxicological effects
- Acute toxicity
- LD50 Rat (male, F344) oral 4100 mg/kg; LD50 Rat (female, F344) oral 3300 mg/kg; LD50 Mouse (male) oral 5280 mg/kg
- Skin corrosion/irritation
- Not classified (based on available data)
- Serious eye damage/irritation
- H318: Causes serious eye damage
- Respiratory or skin sensitisation
- H317: May cause an allergic skin reaction
- Germ cell mutagenicity
- Not classified (based on available data)
- Carcinogenicity
- Not classified (based on available data)
- Specific target organ toxicity (single exposure)
- H335: May cause respiratory irritation
- Specific target organ toxicity (repeated exposure)
- Not classified (based on available data)
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- 3077
- UN-No. (IMDG)
- 3077
- UN-No. (IATA)
- 3077
- UN-No. (ADN)
- 3077
- UN-No. (RID)
- 3077
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- Environmentally hazardous substance, solid, n.o.s.
- Proper Shipping Name (IMDG)
- Environmentally hazardous substance, solid, n.o.s.
- Proper Shipping Name (IATA)
- Environmentally hazardous substance, solid, n.o.s.
- Proper Shipping Name (ADN)
- Environmentally hazardous substance, solid, n.o.s.
- Proper Shipping Name (RID)
- Environmentally hazardous substance, solid, n.o.s.
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- 9
14.4 — Packing group
- Packing group (ADR)
- III
- Packing group (IMDG)
- III
- Packing group (IATA)
- III
- Packing group (ADN)
- III
- Packing group (RID)
- III
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
Used as a monomer reference compound in polycarbonate and epoxy resin research, and in endocrine-disruptor monitoring studies.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL00294
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 228.29 g/mol
| Test | Standard | Observed |
|---|---|---|
| Assay Purity | ≥ 97% | 98.5% |
| Melting Point | 159-161 °C | 160 °C |
| Moisture Content | ≤ 0.5% | 0.3% |
| Residue on Ignition | ≤ 0.1% | 0.05% |
| Related Substances | No more than 0.5% of any single impurity | 0.2% |
The above product is expected to comply with 97% grade specification.
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| 97% | ≥ 97% | m.p. 160 °C; b.p. 360.5 °C at 760 mm Hg | ≤ 0.5% | ≤ 0.1% | No more than 0.5% of any single impurity | In water, 300 mg/L at 25 °C |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
