Dodecylamine
- CAS Number
- 124-22-1
- HSN Code
- 29211990
- Molecular Formula
- C12H27N
- Catalogue Number
- AL1955
- Purity
- 98% min
- Molecular Weight
- 185.35 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
Dodecylamine is a primary aliphatic amine.
Also known as Laurylamine.
- Catalogue No.
- AL1955
- CAS Number
- 124-22-1
- Molecular Formula
- C12H27N
- Molecular Weight
- 185.35 g/mol
- HSN Code
- 29211990
- Grade
- 98%
- Product Form
- Substance
Melting point: 28.3 °C; Boiling point: 259 °C; Flash point: 178 °C (COC); Density: 0.8015 gcu cm @ 20 °C4 °C; Solubility: Miscible in ethanol, ethyl ether, and benzene.
- Appearance
- Yellow liquid with an ammonia-like odor
- Shelf Life
- -
- Packaging
- Available in: 100 ml glass bottle, 500 ml glass bottle
- Storage
- Separated from acids, acid anhydrides, acid chlorides and oxidants. Store in an area without drain or sewer access. Provision to contain effluent from fire extinguishing.
1.1 — Product identifier
- Chemical Name
- Dodecylamine
- Catalogue No.
- AL1955
- Product form
- Substance
- CAS Number
- 124-22-1
- EC Number
- 204-690-6
- Grade
- 98%
- EC Index Number
- 612-002-00-4
- Chemical Formula
- C12H27N
- HSN Code
- 29211990
- Synonyms
- Laurylamine
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Surfactant intermediate, corrosion inhibitor
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.1 — Classification of the substance or mixture
- Classification according to Regulation (EC) No 1272/2008
- Met. Corr. 1; Asp. Tox. 1; Skin Corr. 1B; STOT SE 3; STOT RE 2; Aquatic Acute 1; Aquatic Chronic 1
- Classification source
- ECHA C&L Inventory via PubChem CID 13583 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements
2.2 — Label elements
- Hazard pictograms
- Corrosive, Irritant, Health Hazard, Environmental Hazard
- Signal word
- Danger
- Hazard statements
- H290: May be corrosive to metals; H304: May be fatal if swallowed and enters airways; H314: Causes severe skin burns and eye damage; H335: May cause respiratory irritation; H373: May causes damage to organs through prolonged or repeated exposure; H400: Very toxic to aquatic life; H410: Very toxic to aquatic life with long lasting effects
2.3 — Other hazards
- Other hazards
- Corrosive to metals
3.1 — Substance
- Name
- Dodecylamine
- CAS No.
- 124-22-1
4.1 — Description of first aid measures
- First-aid measures after inhalation
- Move to fresh air. If symptoms persist, seek medical attention.
- First-aid measures after skin contact
- Wash with soap and water. Seek medical attention if irritation develops.
- First-aid measures after eye contact
- Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and seek medical attention.
- First-aid measures after ingestion
- Do not induce vomiting. Rinse mouth and seek medical attention immediately.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- May cause irritation to skin, eyes, and respiratory tract.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Water spray, carbon dioxide, dry chemical powder, foam.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- Combustible material; may produce toxic fumes in a fire.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Contain spill and absorb with inert material. Dispose of in accordance with local regulations.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Personal protection: chemical protection suit including self-contained breathing apparatus. Do NOT let this chemical enter the environment. Sweep spilled substance into covered sealable containers. Carefully collect remainder.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Use gloves and eye protection. Avoid contact with skin and eyes.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Separated from acids, acid anhydrides, acid chlorides and oxidants. Store in an area without drain or sewer access. Provision to contain effluent from fire extinguishing.
8.2 — Exposure controls
- Hand protection
- Protective gloves (e.g. nitrile rubber)
- Eye protection
- Chemical safety goggles or safety glasses
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Use appropriate respiratory protection if ventilation is inadequate.
9.1 — Information on basic physical and chemical properties
- Physical state
- Solid or liquid
- Colour
- White to pale yellow
- Odour
- Amine
- Odour threshold
- Not specified
- pH value
- Not specified
- Relative evaporation rate (butylacetate=1)
- Not specified
- Melting point
- 28.3 °C
- Freezing point
- Not specified
- Boiling point
- 259 °C
- Flash point
- 178 °C (COC)
- Auto-ignition temperature
- Not specified
- Decomposition temperature
- Not specified
- Flammability (solid, gas)
- Combustible
- Vapour pressure
- 8.05X10-3 mm Hg at 25 °C
- Relative vapour density at 20°C
- Not specified
- Density
- 0.8015 gcu cm @ 20 °C4 °C
- Solubility
- Miscible in ethanol, ethyl ether, and benzene.
- Log Pow
- 4.76
- Viscosity, kinematic
- Not specified
- Viscosity, dynamic
- Not specified
- Explosive properties
- Not explosive
- Oxidising properties
- Not oxidizing
- Explosive limits
- Not specified
10.1 — Reactivity
- Reactivity
- Stable under normal conditions, but may react with strong oxidizing agents.
10.2 — Chemical stability
- Chemical stability
- Stable under recommended storage conditions.
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- Decomposes on burning. This produces toxic fumes including nitrogen oxides. The solution in water is a weak base.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong oxidizing agents, acids, and bases.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- When heated to decomposition it emits acrid smoke and irritating fumes.
11.1 — Information on toxicological effects
- Acute toxicity
- LD50 Mouse ip 320 mg/kg
- Skin corrosion/irritation
- H314: Causes severe skin burns and eye damage
- Serious eye damage/irritation
- Not classified (based on available data)
- Respiratory or skin sensitisation
- Not classified (based on available data)
- Germ cell mutagenicity
- Not classified (based on available data)
- Carcinogenicity
- Not classified (based on available data)
- Specific target organ toxicity (single exposure)
- H335: May cause respiratory irritation
- Specific target organ toxicity (repeated exposure)
- H373: May causes damage to organs through prolonged or repeated exposure
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- UN 3259
- UN-No. (IMDG)
- UN 3259
- UN-No. (IATA)
- UN 3259
- UN-No. (ADN)
- UN 3259
- UN-No. (RID)
- UN 3259
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- Dodecylamine
- Proper Shipping Name (IMDG)
- Dodecylamine
- Proper Shipping Name (IATA)
- Dodecylamine
- Proper Shipping Name (ADN)
- Dodecylamine
- Proper Shipping Name (RID)
- Dodecylamine
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- 8
14.4 — Packing group
- Packing group (ADR)
- II
- Packing group (IMDG)
- II
- Packing group (IATA)
- II
- Packing group (ADN)
- II
- Packing group (RID)
- II
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
This compound is used as a building block in the synthesis of cationic surfactants and corrosion inhibitors, making it valuable in various industrial applications.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL0654D
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 185.35 g/mol
| Test | Standard | Observed |
|---|---|---|
| Assay | 98% min | 98.5% |
| Moisture | <0.5% | 0.3% |
| Related Substances | Not more than 1% | 0.5% |
| Appearance | White to pale yellow | Pale yellow waxy solid |
The above product is expected to comply with 98% grade specification.
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| 98% | 98% min | m.p. 28.3 °C; b.p. 259 °C | <0.5% | Not specified | Not more than 1% | Miscible in ethanol, ethyl ether, and benzene. |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
