m-Cresol
- CAS Number
- 108-39-4
- HSN Code
- 29071290
- Molecular Formula
- C7H8O
- Catalogue Number
- AL1549
- Purity
- ≥ 98%
- Molecular Weight
- 108.14 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
M-cresol is a cresol with the methyl substituent at position 3. It is a minor urinary metabolite of toluene.
Also known as 3-Methylphenol.
- Catalogue No.
- AL1549
- CAS Number
- 108-39-4
- Molecular Formula
- C7H8O
- Molecular Weight
- 108.14 g/mol
- HSN Code
- 29071290
- Grade
- 98% For Synthesis
- Product Form
- Substance
Melting point: 12.2 °C; Boiling point: 202.2 °C; Flash point: 187 °F (86 °C) (Closed cup); Density: 1.034 at 20 °C/4 °C; Solubility: In water, 2.22X10+4 mg/L at 25 °C.
- Appearance
- Colorless, yellowish liquid
- Shelf Life
- -
- Packaging
- Available in: 500 ml glass bottle with tin cap, 2.5 Lt glass bottle with tin cap
- Storage
- Separated from strong oxidants and food and feedstuffs. Ventilation along the floor. Store in an area without drain or sewer access. Provision to contain effluent from fire extinguishing.
1.1 — Product identifier
- Chemical Name
- m-Cresol
- Catalogue No.
- AL1549
- Product form
- Substance
- CAS Number
- 108-39-4
- EC Number
- 203-577-9
- Grade
- 98% For Synthesis
- EC Index Number
- 604-002-00-3
- Chemical Formula
- C7H8O
- HSN Code
- 29071290
- Synonyms
- 3-Methylphenol
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Used as a synthetic intermediate and preservative in pharmaceuticals.
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.1 — Classification of the substance or mixture
- Classification according to Regulation (EC) No 1272/2008
- Acute Tox. 3; Skin Corr. 1B
- Classification source
- ECHA C&L Inventory via PubChem CID 342 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements
2.2 — Label elements
- Hazard pictograms
- Corrosive, Acute Toxic
- Signal word
- Danger
- Hazard statements
- H301: Toxic if swallowed; H311: Toxic in contact with skin; H314: Causes severe skin burns and eye damage
2.3 — Other hazards
- Other hazards
- Corrosive to skin and eyes; may cause respiratory irritation.
3.1 — Substance
- Name
- m-Cresol
- CAS No.
- 108-39-4
4.1 — Description of first aid measures
- First-aid measures after inhalation
- If this chemical has been inhaled, remove the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the person warm and at rest.
- First-aid measures after skin contact
- If this chemical contacts the skin, immediately wash the contaminated skin with soap and water. If this chemical penetrates the clothing, immediately remove the clothing, wash the skin with soap and water, and get medical attention promptly.
- First-aid measures after eye contact
- If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.
- First-aid measures after ingestion
- If this chemical has been swallowed, get medical attention immediately.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- Toxic effects may include headache, dizziness, and respiratory distress.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Water spray, carbon dioxide, dry chemical powder, foam.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- Vapors will seek out low-lying areas where they can accumulate.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Evacuate area and ventilate. Wear appropriate protective equipment. Contain and absorb spill with inert material.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Personal protection: chemical protection suit and filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Collect leaking liquid in sealable containers. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Handle in a fume hood. Use gloves and protective eyewear. Avoid contact with skin and eyes.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Separated from strong oxidants and food and feedstuffs. Ventilation along the floor. Store in an area without drain or sewer access. Provision to contain effluent from fire extinguishing.
8.2 — Exposure controls
- Hand protection
- Protective gloves (e.g. nitrile rubber)
- Eye protection
- Tightly fitting safety goggles. Faceshield (8-inch minimum).
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Use appropriate respiratory protection if ventilation is inadequate.
9.1 — Information on basic physical and chemical properties
- Physical state
- Liquid
- Colour
- Colorless to pale yellow
- Odour
- Phenolic odor
- Odour threshold
- Not specified
- pH value
- Not specified
- Relative evaporation rate (butylacetate=1)
- Not specified
- Melting point
- 12.2 °C
- Freezing point
- Not specified
- Boiling point
- 202.2 °C
- Flash point
- 187 °F (86 °C) (Closed cup)
- Auto-ignition temperature
- 1038 °F (558 °C)
- Decomposition temperature
- Not specified
- Flammability (solid, gas)
- Not applicable
- Vapour pressure
- 0.11 mm Hg at 25 °C
- Relative vapour density at 20°C
- 3.72 (Air = 1)
- Density
- 1.034 at 20 °C/4 °C
- Solubility
- In water, 2.22X10+4 mg/L at 25 °C
- Log Pow
- 1.96
- Viscosity, kinematic
- Not specified
- Viscosity, dynamic
- Not specified
- Explosive properties
- Not explosive
- Oxidising properties
- Not oxidizing
- Explosive limits
- Not specified
10.1 — Reactivity
- Reactivity
- Stable under normal conditions. Reacts with strong oxidizing agents.
10.2 — Chemical stability
- Chemical stability
- Crystals or liquid darken with exposure to air and light.
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- Reacts violently with strong oxidants. The solution in water is a weak acid.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong oxidizing agents, strong acids, and bases.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- Not specified
11.1 — Information on toxicological effects
- Acute toxicity
- LD50 Rat oral 242 mg/kg; LD50 Rat dermal 1,100 mg/kg; LC50 Rat inhalation 58 mgcu m8 hr
- Skin corrosion/irritation
- H314: Causes severe skin burns and eye damage
- Serious eye damage/irritation
- Not classified (based on available data)
- Respiratory or skin sensitisation
- Not classified (based on available data)
- Germ cell mutagenicity
- Not classified (based on available data)
- Carcinogenicity
- Not classified (based on available data)
- Specific target organ toxicity (single exposure)
- Not classified (based on available data)
- Specific target organ toxicity (repeated exposure)
- Not classified (based on available data)
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- 2076
- UN-No. (IMDG)
- 2076
- UN-No. (IATA)
- 2076
- UN-No. (ADN)
- 2076
- UN-No. (RID)
- 2076
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- m-Cresol
- Proper Shipping Name (IMDG)
- m-Cresol
- Proper Shipping Name (IATA)
- m-Cresol
- Proper Shipping Name (ADN)
- m-Cresol
- Proper Shipping Name (RID)
- m-Cresol
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- 6.1 (8)
14.4 — Packing group
- Packing group (ADR)
- II
- Packing group (IMDG)
- II
- Packing group (IATA)
- II
- Packing group (ADN)
- II
- Packing group (RID)
- II
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
m-Cresol is primarily used as an intermediate in the synthesis of resins and pesticides. Additionally, it serves as a preservative in pharmaceutical formulations, particularly in insulin injections.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL00566
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 108.14 g/mol
| Test | Standard | Observed |
|---|---|---|
| Assay | ≥ 98% | 98.5% |
| Density | 1.034 g/mL | 1.034 g/mL |
| Boiling Point | 202 °C | 202 °C |
| Melting Point | -5 °C | -5 °C |
| Moisture Content | ≤ 0.5% | 0.3% |
| Residue on Ignition | ≤ 0.1% | 0.05% |
| Related Substances | Not more than 1% | 0.8% |
| Solubility | Soluble in water, alcohol, and ether | Soluble in all tested solvents. |
The above product is expected to comply with 98% For Synthesis grade specification.
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| 98% For Synthesis | ≥ 98% | m.p. 12.2 °C; b.p. 202.2 °C | ≤ 0.5% | ≤ 0.1% | Not more than 1% | In water, 2.22X10+4 mg/L at 25 °C |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
