Monoethylaniline
- CAS Number
- 103-69-5
- HSN Code
- 29214290
- Molecular Formula
- C8H11N
- Catalogue Number
- AL2049
- Purity
- ≥ 98%
- Molecular Weight
- 121.18 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
N-Ethylaniline is a member of benzenes.
Also known as N-ethylaniline.
- Catalogue No.
- AL2049
- CAS Number
- 103-69-5
- Molecular Formula
- C8H11N
- Molecular Weight
- 121.18 g/mol
- HSN Code
- 29214290
- Grade
- 98% For Synthesis
- Product Form
- Substance
Melting point: -63.5 °C; Boiling point: 204.5 °C; Flash point: 85 °C o.c; Density: 0.9625 @ 20 °C/4 °C; Solubility: Insol in water; miscible with alcohol, ether, and many other organic solvents.
- Appearance
- Colorless liquid
- Shelf Life
- -
- Packaging
- Available in: 500 ml glass bottle, 2.5 Lt glass bottle
- Storage
- Separated from food and feedstuffs, strong oxidants and strong acids. See Chemical Dangers. Ventilation along the floor.
1.1 — Product identifier
- Chemical Name
- Monoethylaniline
- Catalogue No.
- AL2049
- Product form
- Substance
- CAS Number
- 103-69-5
- EC Number
- 203-135-5
- Grade
- 98% For Synthesis
- EC Index Number
- 612-002-00-5
- Chemical Formula
- C8H11N
- HSN Code
- 29214290
- Synonyms
- N-ethylaniline
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Synthetic intermediate in dye and rubber-chemical chemistry.
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.1 — Classification of the substance or mixture
- Classification according to Regulation (EC) No 1272/2008
- Acute Tox. 3; STOT RE 2
- Classification source
- ECHA C&L Inventory via PubChem CID 7670 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements
2.2 — Label elements
- Hazard pictograms
- Acute Toxic, Health Hazard
- Signal word
- Danger
- Hazard statements
- H301: Toxic if swallowed; H311: Toxic in contact with skin; H331: Toxic if inhaled; H373: May causes damage to organs through prolonged or repeated exposure
- Precautionary statements
- P260, P261, P262, P264, P270, P271, P280, P301+P316, P302+P352, P304+P340, P316, P319, P321, P330, P361+P364, P403+P233, P405, P501
2.3 — Other hazards
- Other hazards
- Toxic; may cause respiratory irritation and skin sensitization.
3.1 — Substance
- Name
- Monoethylaniline
- CAS No.
- 103-69-5
4.1 — Description of first aid measures
- First-aid measures after inhalation
- Move to fresh air. If breathing is difficult, give oxygen. Seek medical attention if symptoms persist.
- First-aid measures after skin contact
- IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water.
- First-aid measures after eye contact
- First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center.
- First-aid measures after ingestion
- Do not induce vomiting. Rinse mouth and seek medical attention immediately.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- Headache, dizziness, nausea, respiratory distress, skin irritation.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Water spray, carbon dioxide, dry chemical powder, foam.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- Toxic fumes may be released in a fire. Use water spray to cool containers exposed to fire.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Evacuate area. Wear appropriate protective equipment. Contain and collect spillage.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Handle in a fume hood. Use gloves and protective eyewear. Avoid contact with skin and eyes.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Separated from food and feedstuffs, strong oxidants and strong acids. See Chemical Dangers. Ventilation along the floor.
8.2 — Exposure controls
- Hand protection
- Protective gloves (e.g. nitrile rubber)
- Eye protection
- Chemical safety goggles or safety glasses
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Use appropriate respiratory protection if ventilation is inadequate.
9.1 — Information on basic physical and chemical properties
- Physical state
- Liquid
- Colour
- Colorless to pale yellow
- Odour
- Aniline-like odor
- Odour threshold
- Not specified
- pH value
- Not specified
- Relative evaporation rate (butylacetate=1)
- Not specified
- Melting point
- -63.5 °C
- Freezing point
- Not specified
- Boiling point
- 204.5 °C
- Flash point
- 85 °C o.c.
- Auto-ignition temperature
- 480 °C
- Decomposition temperature
- Not specified
- Flammability (solid, gas)
- Not applicable
- Vapour pressure
- 0.204 mm Hg @ 25 °C
- Relative vapour density at 20°C
- 4.2 (AIR= 1)
- Density
- 0.9625 @ 20 °C/4 °C
- Solubility
- Insol in water; miscible with alcohol, ether, and many other organic solvents
- Log Pow
- log Kow= 2.16
- Viscosity, kinematic
- Not specified
- Viscosity, dynamic
- Not specified
- Explosive properties
- Not explosive
- Oxidising properties
- Not oxidizing
- Explosive limits
- Not specified
10.1 — Reactivity
- Reactivity
- Stable under normal conditions. Reacts with strong oxidizing agents.
10.2 — Chemical stability
- Chemical stability
- Stable under recommended storage conditions.
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- On combustion, forms toxic gases including nitrogen oxides. Reacts with oxidants. Reacts violently with concentrated nitric acid.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong oxidizing agents, strong acids.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- When heated to decomposition it emits highly toxic fumes of aniline and nitroxides.
11.1 — Information on toxicological effects
- Acute toxicity
- LD50 Rat oral is 1.1 g/kg; LD50 Rat oral 334 mg/kg; LD50 Rat skin 4700 mg/kg
- Skin corrosion/irritation
- Not classified (based on available data)
- Serious eye damage/irritation
- Not classified (based on available data)
- Respiratory or skin sensitisation
- Not classified (based on available data)
- Germ cell mutagenicity
- Not classified (based on available data)
- Carcinogenicity
- Not classified (based on available data)
- Specific target organ toxicity (single exposure)
- Not classified (based on available data)
- Specific target organ toxicity (repeated exposure)
- H373: May causes damage to organs through prolonged or repeated exposure
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- UN 2272
- UN-No. (IMDG)
- UN 2272
- UN-No. (IATA)
- UN 2272
- UN-No. (ADN)
- UN 2272
- UN-No. (RID)
- UN 2272
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- Monoethylaniline
- Proper Shipping Name (IMDG)
- Monoethylaniline
- Proper Shipping Name (IATA)
- Monoethylaniline
- Proper Shipping Name (ADN)
- Monoethylaniline
- Proper Shipping Name (RID)
- Monoethylaniline
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- 6.1
14.4 — Packing group
- Packing group (ADR)
- III
- Packing group (IMDG)
- III
- Packing group (IATA)
- III
- Packing group (ADN)
- III
- Packing group (RID)
- III
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
Used as a building block in the synthesis of dyes, rubber accelerators, and pharmaceutical intermediates.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL0678A
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 121.18 g/mol
| Test | Standard | Observed |
|---|---|---|
| Assay | ≥ 98% | 98.5% |
| Density | 0.963 g/mL | 0.963 g/mL |
| Boiling Point | 184 °C | 184 °C |
| Moisture Content | ≤ 0.5% | 0.3% |
| Residue on Ignition | ≤ 0.1% | 0.05% |
| Related Substances | None detected | None detected |
The above product is expected to comply with 98% For Synthesis grade specification.
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| 98% For Synthesis | ≥ 98% | m.p. -63.5 °C; b.p. 204.5 °C | ≤ 0.5% | ≤ 0.1% | None detected | Insol in water; miscible with alcohol, ether, and many other organic solvents |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
