Phenol
- CAS Number
- 108-95-2
- HSN Code
- 29071110
- Molecular Formula
- C6H6O
- Catalogue Number
- AL3463
- Purity
- 99% min
- Molecular Weight
- 94.11 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
Phenol solution, [aqueous] is a white crystalline mass dissolved in an aqueous solution. Solution may be colorless to slightly pink in color with a distinctive phenol odor; sharp burning taste.
Also known as Hydroxybenzene, Carbolic acid.
- Catalogue No.
- AL3463
- CAS Number
- 108-95-2
- Molecular Formula
- C6H6O
- Molecular Weight
- 94.11 g/mol
- HSN Code
- 29071110
- Grade
- Extra Pure
- Product Form
- Substance
Melting point: 43 °C; Boiling point: 182 °C at 760 mmHg; Flash point: 79 °C; Density: 1.04 at 105.8 °F - Denser than water; will sink; Solubility: 50 to 100 mg/mL at 66 °F.
- Appearance
- Colorless acicular crystals or white, crystalline mass
- Shelf Life
- 2 years
- Packaging
- Available in: 500 gm glass bottle, 5 Kg plastic container
- Storage
- Provision to contain effluent from fire extinguishing. Separated from strong oxidants and food and feedstuffs. Dry. Well closed. Store only in original container. Keep in a well-ventilated room. Store in an area without drain or sewer access.
1.1 — Product identifier
- Chemical Name
- Phenol
- Catalogue No.
- AL3463
- Product form
- Substance
- CAS Number
- 108-95-2
- EC Number
- 203-632-7
- Grade
- Extra Pure
- EC Index Number
- 604-001-00-2
- Chemical Formula
- C6H6O
- HSN Code
- 29071110
- Synonyms
- Hydroxybenzene, Carbolic acid
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Chemical building block, antiseptic, and intermediate in synthesis.
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.1 — Classification of the substance or mixture
- Classification according to Regulation (EC) No 1272/2008
- Acute Tox. 3; Skin Corr. 1B; Muta. 2; STOT RE 2
- Classification source
- ECHA C&L Inventory via PubChem CID 996 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements
2.2 — Label elements
- Hazard pictograms
- Corrosive, Acute Toxic, Health Hazard
- Signal word
- Danger
- Hazard statements
- H301: Toxic if swallowed; H311: Toxic in contact with skin; H314: Causes severe skin burns and eye damage; H331: Toxic if inhaled; H341: Suspected of causing genetic defects; H373: May causes damage to organs through prolonged or repeated exposure
2.3 — Other hazards
- Other hazards
- Corrosive to metals; may cause severe skin burns and eye damage.
3.1 — Substance
- Name
- Phenol
- CAS No.
- 108-95-2
4.1 — Description of first aid measures
- First-aid measures after inhalation
- Move to fresh air. If breathing is difficult, give oxygen. Seek medical attention.
- First-aid measures after skin contact
- IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water.
- First-aid measures after eye contact
- First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center.
- First-aid measures after ingestion
- Do not induce vomiting. Rinse mouth. Seek medical attention immediately.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- Burning sensation, cough, shortness of breath, headache, dizziness, nausea.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Water spray, carbon dioxide, dry chemical powder, foam.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- Combustible. May produce toxic fumes in a fire.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Evacuate area. Wear appropriate protective equipment. Contain and absorb spill with inert material.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Personal protection: chemical protection suit including self-contained breathing apparatus. Do NOT let this chemical enter the environment. Sweep spilled substance into covered sealable containers. If appropriate, moisten first to prevent dusting.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Avoid contact with skin and eyes. Use only in a fume hood with appropriate PPE.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Provision to contain effluent from fire extinguishing. Separated from strong oxidants and food and feedstuffs. Dry. Well closed. Store only in original container. Keep in a well-ventilated room. Store in an area without drain or sewer access.
8.2 — Exposure controls
- Hand protection
- Protective gloves (e.g. nitrile rubber)
- Eye protection
- Chemical safety goggles or safety glasses
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Use appropriate respiratory protection if ventilation is inadequate.
9.1 — Information on basic physical and chemical properties
- Physical state
- Solid
- Colour
- White to pink
- Odour
- Distinct aromatic, somewhat sickening sweet and acrid odor, discernable at 0.5 to 5 ppm
- Odour threshold
- Not specified
- pH value
- Not applicable
- Relative evaporation rate (butylacetate=1)
- Not specified
- Melting point
- 43 °C
- Freezing point
- Not specified
- Boiling point
- 182 °C at 760 mmHg
- Flash point
- 79 °C
- Auto-ignition temperature
- 1319 °F (715 °C)
- Decomposition temperature
- Not specified
- Flammability (solid, gas)
- Flammable solid
- Vapour pressure
- 0.2 mmHg at 68 °F ; 0.35 mmHg at 77 °F
- Relative vapour density at 20°C
- 3.24 (Air= 1)
- Density
- 1.04 at 105.8 °F - Denser than water; will sink
- Solubility
- 50 to 100 mg/mL at 66 °F
- Log Pow
- Log Kow = 1.46
- Viscosity, kinematic
- Not specified
- Viscosity, dynamic
- Not specified
- Explosive properties
- Not explosive
- Oxidising properties
- Not oxidizing
- Explosive limits
- Not specified
10.1 — Reactivity
- Reactivity
- Stable under normal conditions. Reacts with strong oxidizing agents.
10.2 — Chemical stability
- Chemical stability
- Prone to redden on exposure to air and light, hastened by presence of alkalinity.
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- The solution in water is a weak acid. Reacts with oxidants. This generates fire and explosion hazard.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong oxidizers, strong acids, and bases.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- When heated to decomposition it emits acrid smoke and irritating fumes.
11.1 — Information on toxicological effects
- Acute toxicity
- LD50 Rat oral 530 mg/kg; LD50 Cat oral 0.1 g/kg; LD50 Dog oral 0.5 g/kg
- Skin corrosion/irritation
- H314: Causes severe skin burns and eye damage
- Serious eye damage/irritation
- Not classified (based on available data)
- Respiratory or skin sensitisation
- Not classified (based on available data)
- Germ cell mutagenicity
- H341: Suspected of causing genetic defects
- Carcinogenicity
- Not classified (based on available data)
- Specific target organ toxicity (single exposure)
- Not classified (based on available data)
- Specific target organ toxicity (repeated exposure)
- H373: May causes damage to organs through prolonged or repeated exposure
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- 1671
- UN-No. (IMDG)
- 1671
- UN-No. (IATA)
- 1671
- UN-No. (ADN)
- 1671
- UN-No. (RID)
- 1671
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- Phenol
- Proper Shipping Name (IMDG)
- Phenol
- Proper Shipping Name (IATA)
- Phenol
- Proper Shipping Name (ADN)
- Phenol
- Proper Shipping Name (RID)
- Phenol
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- 6.1
14.4 — Packing group
- Packing group (ADR)
- II
- Packing group (IMDG)
- II
- Packing group (IATA)
- II
- Packing group (ADN)
- II
- Packing group (RID)
- II
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
Used as a fundamental building block in resin (Bakelite), pharmaceutical (aspirin), and dye intermediate synthesis research.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL01160
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 94.11 g/mol
| Test | Standard | Observed |
|---|---|---|
| Assay | 99% min | 99.5% |
| Melting Point | 40.5 °C | 40.6 °C |
| Moisture Content | 0.5% max | 0.3% |
| Residue on Ignition | 0.1% max | 0.05% |
| Related Substances | None detected | None detected |
| Solubility | Soluble in water and organic solvents | Fully soluble in water and ethanol. |
The above product is expected to comply with Extra Pure grade specification.
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| Extra Pure | 99% min | m.p. 43 °C; b.p. 182 °C at 760 mmHg | 0.5% max | 0.1% max | None detected | 50 to 100 mg/mL at 66 °F |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
