Sebacic Acid
- CAS Number
- 111-20-6
- HSN Code
- 29171300
- Molecular Formula
- C10H18O4
- Catalogue Number
- AL3961
- Purity
- ≥ 98%
- Molecular Weight
- 202.25 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
Sebacic acid is an alpha,-dicarboxylic acid that is the 1,8-dicarboxy derivative of octane. It has a role as a plant metabolite and a human metabolite.
Also known as Decanedioic acid.
- Catalogue No.
- AL3961
- CAS Number
- 111-20-6
- Molecular Formula
- C10H18O4
- Molecular Weight
- 202.25 g/mol
- HSN Code
- 29171300
- Grade
- 98%
- Product Form
- Substance
Melting point: 131 °C; Boiling point: at 13.3kPa: 294 °C; Flash point: 220 °C; Density: 1.2 g/cm³; Solubility: Solubility in water, g/100ml: 0.1 (poor).
- Appearance
- Sebacic acid is a white granular powder
- Shelf Life
- 2 years
- Packaging
- Available in: 500 gm plastic bottle
- Storage
- Separated from strong oxidants and strong bases.
1.1 — Product identifier
- Chemical Name
- Sebacic Acid
- Catalogue No.
- AL3961
- Product form
- Substance
- CAS Number
- 111-20-6
- EC Number
- 203-845-5
- Grade
- 98%
- EC Index Number
- Not applicable
- Chemical Formula
- C10H18O4
- HSN Code
- 29171300
- Synonyms
- Decanedioic acid
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Monomer for nylon and specialty polymer synthesis
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.1 — Classification of the substance or mixture
- Classification according to Regulation (EC) No 1272/2008
- Not classified as hazardous (majority of notifications to the ECHA C&L Inventory)
- Classification source
- ECHA C&L Inventory via PubChem CID 5192 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements
2.2 — Label elements
- Hazard pictograms
- None required
- Signal word
- None
- Hazard statements
- None
2.3 — Other hazards
- Other hazards
- None identified
3.1 — Substance
- Name
- Sebacic Acid
- CAS No.
- 111-20-6
4.1 — Description of first aid measures
- First-aid measures after inhalation
- Move to fresh air. If symptoms persist, seek medical attention.
- First-aid measures after skin contact
- IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water.
- First-aid measures after eye contact
- First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center.
- First-aid measures after ingestion
- Rinse mouth. Do not induce vomiting. Seek medical attention if symptoms occur.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- May cause mild irritation to skin, eyes, and respiratory tract.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Water spray, carbon dioxide, dry chemical powder, foam.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- Dust explosion possible if in powder or granular form, mixed with air. If dry, it can be charged electrostatically by swirling, pneumatic transport, pouring, etc.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Contain spill and collect using appropriate methods. Dispose of in accordance with local regulations.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Avoid contact with skin and eyes. Use in a well-ventilated area.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Separated from strong oxidants and strong bases.
8.2 — Exposure controls
- Hand protection
- Protective gloves (e.g. nitrile rubber)
- Eye protection
- Chemical safety goggles or safety glasses
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Use appropriate respiratory protection if ventilation is inadequate.
9.1 — Information on basic physical and chemical properties
- Physical state
- Solid
- Colour
- White
- Odour
- Faint
- Odour threshold
- Not applicable
- pH value
- Not applicable
- Relative evaporation rate (butylacetate=1)
- Not applicable
- Melting point
- 131 °C
- Freezing point
- Not applicable
- Boiling point
- at 13.3kPa: 294 °C
- Flash point
- 220 °C
- Auto-ignition temperature
- Not applicable
- Decomposition temperature
- Not applicable
- Flammability (solid, gas)
- Combustible
- Vapour pressure
- 1 mmHg at 361 °F ; 100 mmHg at 562.1 °F; 760 mmHg at 666.1 °F
- Relative vapour density at 20°C
- Not applicable
- Density
- 1.2 g/cm³
- Solubility
- Solubility in water, g/100ml: 0.1 (poor)
- Log Pow
- 2.2
- Viscosity, kinematic
- Not applicable
- Viscosity, dynamic
- Not applicable
- Explosive properties
- Not explosive
- Oxidising properties
- Not oxidizing
- Explosive limits
- Not applicable
10.1 — Reactivity
- Reactivity
- Stable under normal conditions; avoid strong oxidizing agents.
10.2 — Chemical stability
- Chemical stability
- Stable under recommended storage conditions.
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- Reacts violently with bases and oxidants.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong oxidizing agents, strong bases.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- Not specified
11.1 — Information on toxicological effects
- Acute toxicity
- LD50 (oral, rat) > 5000 mg/kg
- Skin corrosion/irritation
- Not classified (based on available data)
- Serious eye damage/irritation
- Not classified (based on available data)
- Respiratory or skin sensitisation
- Not classified (based on available data)
- Germ cell mutagenicity
- Not classified (based on available data)
- Carcinogenicity
- Not classified (based on available data)
- Specific target organ toxicity (single exposure)
- Not classified (based on available data)
- Specific target organ toxicity (repeated exposure)
- Not classified (based on available data)
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- Not assigned
- UN-No. (IMDG)
- Not assigned
- UN-No. (IATA)
- Not assigned
- UN-No. (ADN)
- Not assigned
- UN-No. (RID)
- Not assigned
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- Not classified as dangerous goods
- Proper Shipping Name (IMDG)
- Not classified as dangerous goods
- Proper Shipping Name (IATA)
- Not classified as dangerous goods
- Proper Shipping Name (ADN)
- Not classified as dangerous goods
- Proper Shipping Name (RID)
- Not classified as dangerous goods
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- Not applicable
14.4 — Packing group
- Packing group (ADR)
- Not applicable
- Packing group (IMDG)
- Not applicable
- Packing group (IATA)
- Not applicable
- Packing group (ADN)
- Not applicable
- Packing group (RID)
- Not applicable
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
Sebacic acid is primarily used as a monomer in the synthesis of nylon-6,10, which is employed in the production of fibers and plastics with enhanced mechanical properties. Additionally, it serves as a key ingredient in the formulation of specialty polyesters and plasticizers, which are utilized in various applications including coatings, adhesives, and sealants. The compound is also found in the cosmetic industry, where it is used in the formulation of skin care products due to its emollient properties. Furthermore, sebacic acid is used in the production of biodegradable plastics, contributing to sustainable material development.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL1304C
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 202.25 g/mol
| Test | Standard | Observed |
|---|---|---|
| Description | White crystalline powder | White crystalline powder |
| Assay | (Min.) 98% | 98.47% |
| Melting point | 130-133°C | 132°C |
The above product complies with LR grade
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| 98% | ≥ 98% | m.p. 131 °C; b.p. at 13.3kPa: 294 °C | ≤ 0.5% | ≤ 0.1% | None detected | Solubility in water, g/100ml: 0.1 (poor) |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
