Sudan I
- CAS Number
- 842-07-9
- HSN Code
- 32049000
- Molecular Formula
- C16H12N2O
- Catalogue Number
- AL4382A
- Purity
- Min. 95%
- Molecular Weight
- 248.28 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
Sudan I is a monoazo compound. It has a role as a dye.
Also known as C.I. 20557, 1-Phenylazo-2-naphthol.
- Catalogue No.
- AL4382A
- CAS Number
- 842-07-9
- Molecular Formula
- C16H12N2O
- Molecular Weight
- 248.28 g/mol
- HSN Code
- 32049000
- Grade
- For Microbiology
- Product Form
- Substance
Melting point: 134 °C; Boiling point: greater than 212 °F at 760 mmHg (sublimes); Density: 0.18 - Less dense than water; will float; Solubility: less than 0.1 mg/mL at 64 °F.
- Appearance
- Dark reddish-yellow leaflets or orange powder
- Shelf Life
- 2 years
- Packaging
- Available in: 10 gm plastic bottle, 25 gm plastic bottle, 100 gm plastic bottle
- Storage
- Store in a cool, dry place, away from light and moisture.
1.1 — Product identifier
- Chemical Name
- Sudan I
- Catalogue No.
- AL4382A
- Product form
- Substance
- CAS Number
- 842-07-9
- EC Number
- 212-668-2
- Grade
- For Microbiology
- EC Index Number
- 612-007-00-6
- Chemical Formula
- C16H12N2O
- HSN Code
- 32049000
- Synonyms
- C.I. 20557, 1-Phenylazo-2-naphthol
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Used as a lipid-specific stain in microbiology and histology.
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.1 — Classification of the substance or mixture
- Classification according to Regulation (EC) No 1272/2008
- Skin Sens. 1; Muta. 2; Carc. 2; Aquatic Chronic 4
- Classification source
- ECHA C&L Inventory via PubChem CID 13297 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements
2.2 — Label elements
- Hazard pictograms
- Irritant, Health Hazard
- Signal word
- Warning
- Hazard statements
- H317: May cause an allergic skin reaction; H341: Suspected of causing genetic defects; H351: Suspected of causing cancer; H413: May cause long lasting harmful effects to aquatic life
- Precautionary statements
- P203, P261, P272, P273, P280, P302+P352, P318, P321, P333+P317, P362+P364, P405, P501
2.3 — Other hazards
- Other hazards
- Suspected carcinogen; handle with care to avoid exposure.
3.1 — Substance
- Name
- Sudan I
- CAS No.
- 842-07-9
4.1 — Description of first aid measures
- First-aid measures after inhalation
- Move to fresh air. If symptoms persist, seek medical attention.
- First-aid measures after skin contact
- IMMEDIATELY flood affected skin with water while removing and isolating all contaminated clothing. Gently wash all affected skin areas thoroughly with soap and water.
- First-aid measures after eye contact
- First check the victim for contact lenses and remove if present. Flush victim's eyes with water or normal saline solution for 20 to 30 minutes while simultaneously calling a hospital or poison control center.
- First-aid measures after ingestion
- Do not induce vomiting. Rinse mouth and seek medical attention immediately.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- May cause irritation to skin, eyes, and respiratory tract. Prolonged exposure may lead to more serious health effects.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Water spray, carbon dioxide, dry chemical powder, foam.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- May emit toxic fumes when burned. Use appropriate fire-fighting measures.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Contain spill and collect using appropriate protective equipment. Dispose of in accordance with local regulations.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Use appropriate personal protective equipment. Sweep up and place in a suitable container for disposal.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Avoid contact with skin and eyes. Use in a well-ventilated area and wear appropriate protective equipment.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Store in a tightly closed container in a cool, dry place away from incompatible materials.
8.2 — Exposure controls
- Hand protection
- Protective gloves (e.g. nitrile rubber)
- Eye protection
- Chemical safety goggles or safety glasses
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Use appropriate respiratory protection if ventilation is inadequate.
9.1 — Information on basic physical and chemical properties
- Physical state
- Solid
- Colour
- Orange-red
- Odour
- Odourless
- Odour threshold
- Not applicable
- pH value
- Not applicable
- Relative evaporation rate (butylacetate=1)
- Not applicable
- Melting point
- 134 °C
- Freezing point
- Not applicable
- Boiling point
- greater than 212 °F at 760 mmHg (sublimes)
- Flash point
- Not applicable
- Auto-ignition temperature
- Not applicable
- Decomposition temperature
- Not applicable
- Flammability (solid, gas)
- Not flammable under normal conditions
- Vapour pressure
- Not applicable
- Relative vapour density at 20°C
- Not applicable
- Density
- 0.18 - Less dense than water; will float
- Solubility
- less than 0.1 mg/mL at 64 °F
- Log Pow
- Not applicable
- Viscosity, kinematic
- Not applicable
- Viscosity, dynamic
- Not applicable
- Explosive properties
- Not explosive
- Oxidising properties
- Not oxidizing
- Explosive limits
- Not applicable
10.1 — Reactivity
- Reactivity
- Stable under normal conditions; avoid strong oxidizing agents.
10.2 — Chemical stability
- Chemical stability
- Stable under recommended storage conditions.
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- No dangerous reactions known under normal conditions of use.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong oxidizing agents, strong acids.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- Not specified
11.1 — Information on toxicological effects
- Acute toxicity
- LD50 (oral, rat) > 2000 mg/kg; low acute toxicity.
- Skin corrosion/irritation
- Not classified (based on available data)
- Serious eye damage/irritation
- Not classified (based on available data)
- Respiratory or skin sensitisation
- H317: May cause an allergic skin reaction
- Germ cell mutagenicity
- H341: Suspected of causing genetic defects
- Carcinogenicity
- H351: Suspected of causing cancer
- Specific target organ toxicity (single exposure)
- Not classified (based on available data)
- Specific target organ toxicity (repeated exposure)
- Not classified (based on available data)
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- Not assigned
- UN-No. (IMDG)
- Not assigned
- UN-No. (IATA)
- Not assigned
- UN-No. (ADN)
- Not assigned
- UN-No. (RID)
- Not assigned
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- Not classified as dangerous goods
- Proper Shipping Name (IMDG)
- Not classified as dangerous goods
- Proper Shipping Name (IATA)
- Not classified as dangerous goods
- Proper Shipping Name (ADN)
- Not classified as dangerous goods
- Proper Shipping Name (RID)
- Not classified as dangerous goods
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- Not applicable
14.4 — Packing group
- Packing group (ADR)
- Not applicable
- Packing group (IMDG)
- Not applicable
- Packing group (IATA)
- Not applicable
- Packing group (ADN)
- Not applicable
- Packing group (RID)
- Not applicable
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
Sudan I is widely used in microbiology and histology as a lipid-specific stain, allowing researchers to visualize fat deposits in tissues. It is particularly useful in the study of adipose tissues and in identifying lipid-rich structures in various biological samples. Beyond microbiology, Sudan I has applications in the textile industry for dyeing purposes, although its use in food products is heavily restricted due to its carcinogenic properties. Additionally, it serves as a marker in various biochemical assays and research studies focused on lipid metabolism and pathology.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL1479A
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 248.28 g/mol
| Test | Standard | Observed |
|---|---|---|
| Assay Purity | Min. 95% | 96.5% |
| Melting Point | 150-155 °C | 152 °C |
| Moisture Content | <1% | 0.5% |
| Residue on Ignition | <0.5% | 0.3% |
| Related Substances | None detected | None detected |
| Solubility | Insoluble in water | Insoluble in water. |
The above product is expected to comply with For Microbiology grade specification.
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| For Microbiology | Min. 95% | m.p. 134 °C; b.p. greater than 212 °F at 760 mmHg (sublimes) | <1% | <0.5% | None detected | less than 0.1 mg/mL at 64 °F |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
