Thymol
- CAS Number
- 89-83-8
- HSN Code
- 29071930
- Molecular Formula
- C10H14O
- Catalogue Number
- AL4558
- Purity
- ≥ 99%
- Molecular Weight
- 150.22 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
Thymol is a phenol that is a natural monoterpene derivative of cymene. It has a role as a volatile oil component.
Also known as 2-Isopropyl-5-methylphenol.
- Catalogue No.
- AL4558
- CAS Number
- 89-83-8
- Molecular Formula
- C10H14O
- Molecular Weight
- 150.22 g/mol
- HSN Code
- 29071930
- Grade
- 99% Extra Pure
- Product Form
- Substance
Melting point: 49.6 °C; Boiling point: 233 °C; Flash point: 110 °C (230 °F) (Closed cup); Density: 0.9699 g/cu cm at 25 °C; Solubility: In water, 900 mg/L at 20 °C.
- Appearance
- Colorless, translucent crystals or plates from ethyl acetate, acetic acid or dimethyl carbonate
- Shelf Life
- 2 years
- Packaging
- Available in: 100 gm glass bottle, 500 gm glass bottle
- Storage
- Keep container tightly closed in a dry and well-ventilated place.
1.1 — Product identifier
- Chemical Name
- Thymol
- Catalogue No.
- AL4558
- Product form
- Substance
- CAS Number
- 89-83-8
- EC Number
- 201-944-8
- Grade
- 99% Extra Pure
- EC Index Number
- 607-134-00-8
- Chemical Formula
- C10H14O
- HSN Code
- 29071930
- Synonyms
- 2-Isopropyl-5-methylphenol
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Antiseptic, preservative, and reference compound
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.1 — Classification of the substance or mixture
- Classification according to Regulation (EC) No 1272/2008
- Acute Tox. 4; Skin Corr. 1B; Aquatic Chronic 2
- Classification source
- ECHA C&L Inventory via PubChem CID 6989 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements
2.2 — Label elements
- Hazard pictograms
- Corrosive, Irritant, Environmental Hazard
- Signal word
- Danger
- Hazard statements
- H302: Harmful if swallowed; H314: Causes severe skin burns and eye damage; H411: Toxic to aquatic life with long lasting effects
2.3 — Other hazards
- Other hazards
- May cause skin and eye irritation; harmful if swallowed.
3.1 — Substance
- Name
- Thymol
- CAS No.
- 89-83-8
4.1 — Description of first aid measures
- First-aid measures after inhalation
- Move to fresh air. If symptoms persist, seek medical attention.
- First-aid measures after skin contact
- Wash with soap and water. If irritation occurs, seek medical attention.
- First-aid measures after eye contact
- Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. Seek medical attention if irritation persists.
- First-aid measures after ingestion
- Do not induce vomiting. Rinse mouth and seek medical attention immediately.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- Irritation of the skin, eyes, and respiratory tract; nausea if ingested.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- Special hazards arising from the substance or mixture: Carbon oxides.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Evacuate area and ventilate. Wear appropriate protective equipment.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Contain spill and absorb with inert material. Dispose of in accordance with local regulations.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Avoid contact with skin and eyes. Use personal protective equipment as required.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Keep container tightly closed in a dry and well-ventilated place.
8.2 — Exposure controls
- Hand protection
- Handle with gloves.
- Eye protection
- Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Use in a well-ventilated area. If exposure limits are exceeded, use appropriate respiratory protection.
9.1 — Information on basic physical and chemical properties
- Physical state
- Solid
- Colour
- White
- Odour
- Odor of thyme
- Odour threshold
- Not specified
- pH value
- Not applicable
- Relative evaporation rate (butylacetate=1)
- Not specified
- Melting point
- 49.6 °C
- Freezing point
- Not specified
- Boiling point
- 233 °C
- Flash point
- 110 °C (230 °F) (Closed cup)
- Auto-ignition temperature
- Not specified
- Decomposition temperature
- Not specified
- Flammability (solid, gas)
- Combustible
- Vapour pressure
- VP: 1 mm Hg at 64 °C
- Relative vapour density at 20°C
- Not specified
- Density
- 0.9699 g/cu cm at 25 °C
- Solubility
- In water, 900 mg/L at 20 °C
- Log Pow
- 3.30
- Viscosity, kinematic
- Not specified
- Viscosity, dynamic
- Not specified
- Explosive properties
- Not explosive
- Oxidising properties
- Not oxidizing
- Explosive limits
- Not specified
10.1 — Reactivity
- Reactivity
- Stable under normal conditions; avoid strong oxidizing agents.
10.2 — Chemical stability
- Chemical stability
- Appreciably volatile at 100 °C; volatilizes in water vapors.
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- No dangerous reactions known under normal conditions of use.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong oxidizing agents, strong acids, and bases.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- When heated to decomposition it emits acrid smoke and irritating fumes.
11.1 — Information on toxicological effects
- Acute toxicity
- LD50 Rat oral 980 mg/kg; LD50 Mouse oral 640 mg/kg; LD50 Mouse iv 100 mg/kg
- Skin corrosion/irritation
- H314: Causes severe skin burns and eye damage
- Serious eye damage/irritation
- Not classified (based on available data)
- Respiratory or skin sensitisation
- Not classified (based on available data)
- Germ cell mutagenicity
- Not classified (based on available data)
- Carcinogenicity
- Not classified (based on available data)
- Specific target organ toxicity (single exposure)
- Not classified (based on available data)
- Specific target organ toxicity (repeated exposure)
- Not classified (based on available data)
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- UN 2430
- UN-No. (IMDG)
- UN 2430
- UN-No. (IATA)
- UN 2430
- UN-No. (ADN)
- UN 2430
- UN-No. (RID)
- UN 2430
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- Thymol
- Proper Shipping Name (IMDG)
- Thymol
- Proper Shipping Name (IATA)
- Thymol
- Proper Shipping Name (ADN)
- Thymol
- Proper Shipping Name (RID)
- Thymol
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- 8
14.4 — Packing group
- Packing group (ADR)
- III
- Packing group (IMDG)
- III
- Packing group (IATA)
- III
- Packing group (ADN)
- III
- Packing group (RID)
- III
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
Thymol is widely used as an antiseptic and preservative in various formulations, particularly in oral care products such as mouthwashes and toothpaste due to its antimicrobial properties. It serves as a reference compound in histological studies, especially in mycology, where it is used as a fixative. Additionally, thymol is utilized in the food industry as a flavoring agent and preservative, and in the cosmetic industry for its fragrance and antimicrobial benefits. Its applications extend to veterinary medicine, where it is used in treatments for various animal ailments.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL01511
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 150.22 g/mol
| Test | Standard | Observed |
|---|---|---|
| Purity | ≥ 99% | 99.5% |
| Melting Point | 51-54 °C | 52 °C |
| Moisture Content | ≤ 0.5% | 0.3% |
| Residue on Ignition | ≤ 0.1% | 0.05% |
| Related Substances | None detected | None detected |
| Solubility | Slightly soluble in water; soluble in ethanol and ether | Soluble in ethanol, slightly soluble in water. |
The above product is expected to comply with 99% Extra Pure grade specification.
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| 99% Extra Pure | ≥ 99% | m.p. 49.6 °C; b.p. 233 °C | ≤ 0.5% | ≤ 0.1% | None detected | In water, 900 mg/L at 20 °C |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
