Acrylic Acid
- CAS Number
- 79-10-7
- HSN Code
- 29161100
- Molecular Formula
- C3H4O2
- Catalogue Number
- AL0110
- Purity
- ≥ 99%
- Molecular Weight
- 72.06 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
Acrylic acid is a alpha,beta-unsaturated monocarboxylic acid that is ethene substituted by a carboxy group. It has a role as a metabolite.
Also known as 2-Propenoic acid, Prop-2-enoic acid.
- Catalogue No.
- AL0110
- CAS Number
- 79-10-7
- Molecular Formula
- C3H4O2
- Molecular Weight
- 72.06 g/mol
- HSN Code
- 29161100
- Grade
- 99% For Synthesis
- Product Form
- Substance
Melting point: 13.56 °C; Boiling point: 142 °C; Flash point: 54 °C (open cup); Density: 1.0511 g/cu cm at 20 °C; Solubility: Miscible with alcohol, and ether.
- Appearance
- Acrid liquid
- Shelf Life
- 12 months
- Packaging
- Available in: 500 ml glass bottle, 2.5 Lt glass bottle
- Storage
- Fireproof. Separated from strong oxidants, strong bases, strong acids and food and feedstuffs. Keep in the dark. Store only if stabilized. Store in an area without drain or sewer access. Storage conditions may vary according to the type of inhibitor used. Refer to the manufacturer's instructions for proper storage conditions.
1.1 — Product identifier
- Chemical Name
- Acrylic Acid
- Catalogue No.
- AL0110
- Product form
- Substance
- CAS Number
- 79-10-7
- EC Number
- 201-177-9
- Grade
- 99% For Synthesis
- EC Index Number
- 607-042-00-9
- Chemical Formula
- C3H4O2
- HSN Code
- 29161100
- Synonyms
- 2-Propenoic acid, Prop-2-enoic acid
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Monomer for the production of polyacrylates and superabsorbent polymers.
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.1 — Classification of the substance or mixture
- Classification according to Regulation (EC) No 1272/2008
- Flam. Liq. 3; Acute Tox. 4; Skin Corr. 1A; STOT SE 3; Aquatic Acute 1
- Classification source
- ECHA C&L Inventory via PubChem CID 6581 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements
2.2 — Label elements
- Hazard pictograms
- Flammable, Corrosive, Irritant, Environmental Hazard
- Signal word
- Danger
- Hazard statements
- H226: Flammable liquid and vapor; H302: Harmful if swallowed; H312: Harmful in contact with skin; H314: Causes severe skin burns and eye damage; H332: Harmful if inhaled; H335: May cause respiratory irritation; H400: Very toxic to aquatic life
2.3 — Other hazards
- Other hazards
- Corrosive to metals; may cause skin and eye irritation.
3.1 — Substance
- Name
- Acrylic Acid
- CAS No.
- 79-10-7
4.1 — Description of first aid measures
- First-aid measures after inhalation
- If this chemical has been inhaled, remove the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the person warm and at rest.
- First-aid measures after skin contact
- If this chemical contacts the skin, immediately flush the contaminated skin with water. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water. Get medical attention promptly.
- First-aid measures after eye contact
- If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.
- First-aid measures after ingestion
- If this chemical has been swallowed, get medical attention immediately.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- Irritation of the respiratory tract, skin, and eyes; potential for burns on contact.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Water spray, carbon dioxide, dry chemical powder, foam.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- Flash back possible over considerable distance.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Evacuate area. Contain spill and absorb with inert material. Dispose of in accordance with local regulations.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Evacuate danger area! Consult an expert! Personal protection: complete protective clothing including self-contained breathing apparatus. Ventilation. Do NOT let this chemical enter the environment. Collect leaking liquid in sealable containers.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Use in a fume hood. Wear appropriate personal protective equipment (PPE). Avoid contact with skin and eyes.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Fireproof. Separated from strong oxidants, strong bases, strong acids and food and feedstuffs. Keep in the dark. Store only if stabilized. Store in an area without drain or sewer access. Storage conditions may vary according to the type of inhibitor used. Refer to the manufacturer's instructions for proper storage conditions.
8.2 — Exposure controls
- Hand protection
- Protective gloves (e.g. nitrile rubber)
- Eye protection
- Chemical safety goggles or safety glasses
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Use appropriate respiratory protection if ventilation is inadequate.
9.1 — Information on basic physical and chemical properties
- Physical state
- Liquid
- Colour
- Colorless
- Odour
- Acrid odor and fumes
- Odour threshold
- Not specified
- pH value
- Not specified
- Relative evaporation rate (butylacetate=1)
- Not specified
- Melting point
- 13.56 °C
- Freezing point
- Not specified
- Boiling point
- 142 °C
- Flash point
- 54 °C (open cup)
- Auto-ignition temperature
- 438 °C; 820 °F
- Decomposition temperature
- Not specified
- Flammability (solid, gas)
- Flammable liquid
- Vapour pressure
- 3.97 mm Hg at 25 °C
- Relative vapour density at 20°C
- 2.5 (Air = 1)
- Density
- 1.0511 g/cu cm at 20 °C
- Solubility
- Miscible with alcohol, and ether
- Log Pow
- 0.35
- Viscosity, kinematic
- Not specified
- Viscosity, dynamic
- Not specified
- Explosive properties
- Not explosive
- Oxidising properties
- Not oxidizing
- Explosive limits
- Lower: 2.1% vol, Upper: 12.5% vol
10.1 — Reactivity
- Reactivity
- Reacts violently with strong oxidizers and bases; polymerizes readily.
10.2 — Chemical stability
- Chemical stability
- Stable under recommended storage conditions. Contains the following stabilizer(s): Mequinol (>=0.018 - <=0.02%).
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- The substance readily polymerizes due to heating, under the influence of light, oxygen, oxidizing agents such as peroxides or other activators (acid, iron salts). This generates fire or explosion hazard. Decomposes on heating.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong oxidizers, strong bases, amines, and alcohols.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- Not specified
11.1 — Information on toxicological effects
- Acute toxicity
- LD50 Rat oral 193 mg/kg; LD50 Rat oral 340 mg/kg; LD50 Rat oral 1500 mg/kg
- Skin corrosion/irritation
- H314: Causes severe skin burns and eye damage
- Serious eye damage/irritation
- Not classified (based on available data)
- Respiratory or skin sensitisation
- Not classified (based on available data)
- Germ cell mutagenicity
- Not classified (based on available data)
- Carcinogenicity
- Not classified (based on available data)
- Specific target organ toxicity (single exposure)
- H335: May cause respiratory irritation
- Specific target organ toxicity (repeated exposure)
- Not classified (based on available data)
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- UN 2218
- UN-No. (IMDG)
- UN 2218
- UN-No. (IATA)
- UN 2218
- UN-No. (ADN)
- UN 2218
- UN-No. (RID)
- UN 2218
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- Acrylic Acid
- Proper Shipping Name (IMDG)
- Acrylic Acid
- Proper Shipping Name (IATA)
- Acrylic Acid
- Proper Shipping Name (ADN)
- Acrylic Acid
- Proper Shipping Name (RID)
- Acrylic Acid
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- 8 (3)
14.4 — Packing group
- Packing group (ADR)
- II
- Packing group (IMDG)
- II
- Packing group (IATA)
- II
- Packing group (ADN)
- II
- Packing group (RID)
- II
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
Acrylic acid is primarily used in polymer chemistry and organic synthesis as the monomer precursor to acrylate esters and superabsorbent polymers. It is also utilized in the production of coatings, adhesives, and textiles.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL00020
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 72.06 g/mol
| Test | Standard | Observed |
|---|---|---|
| Assay | ≥ 99% | 99.5% |
| Density | 1.05 g/mL | 1.05 g/mL |
| Boiling Point | 141 °C | 141 °C |
| Flash Point | 46 °C | 46 °C |
| Moisture Content | ≤ 0.5% | 0.3% |
The above product is expected to comply with 99% For Synthesis grade specification.
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| 99% For Synthesis | ≥ 99% | m.p. 13.56 °C; b.p. 142 °C | ≤ 0.5% | ≤ 0.1% | None detected | Miscible with alcohol, and ether |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
