Resorcinol
- CAS Number
- 108-46-3
- HSN Code
- 29072100
- Molecular Formula
- C6H6O2
- Catalogue Number
- AL3906
- Purity
- 99%
- Molecular Weight
- 110.11 g/mol
Complies with : IP | BP | USP | EP | ACS
ISO 9001
ISO 14001
GMP
COA with every batch
Key Properties
Resorcinol is a benzenediol that is benzene dihydroxylated at positions 1 and 3. It has a role as a sensitiser and an erythropoietin inhibitor.
Also known as 1,3-Dihydroxybenzene.
- Catalogue No.
- AL3906
- CAS Number
- 108-46-3
- Molecular Formula
- C6H6O2
- Molecular Weight
- 110.11 g/mol
- HSN Code
- 29072100
- Grade
- AR (Analytical Reagent)
- Product Form
- Substance
Melting point: 109.8 °C; Boiling point: 280 °C, but volatilizes at lower temperature and is slightly volatile with steam; Flash point: 127 °C; Density: 1.278 g/cu cm at 20 °C; Solubility: In water, 7.17X10+5 mg/L at 25 °C.
- Appearance
- White needle-like crystals
- Shelf Life
- -
- Packaging
- Available in: 100 gm plastic bottle, 250 gm plastic bottle, 500 gm plastic bottle
- Storage
- Separated from incompatible materials and food and feedstuffs. See Chemical Dangers.
1.1 — Product identifier
- Chemical Name
- Resorcinol
- Catalogue No.
- AL3906
- Product form
- Substance
- CAS Number
- 108-46-3
- EC Number
- 203-585-2
- Grade
- AR (Analytical Reagent)
- EC Index Number
- 604-007-00-8
- Chemical Formula
- C6H6O2
- HSN Code
- 29072100
- Synonyms
- 1,3-Dihydroxybenzene
1.2 — Relevant identified uses of the substance or mixture and uses advised against
- Use of the substance/mixture
- Used as a reagent in chemical analysis and synthesis.
- Uses advised against
- Not specified
1.3 — Details of the supplier of the safety data sheet
- Company identification
- Address:- 102, B wing, Savgan Heights, RTO Lane,Andheri (W), Mumbai-400 053Maharashtra, India.
1.4 — Emergency Contact Details
- Phone / e-Mail
- Phone : +91 22 26317055 Mobile : +91 9820385757 e-mail : info@alphachemika.co.in
2.1 — Classification of the substance or mixture
- Classification according to Regulation (EC) No 1272/2008
- Acute Tox. 4; Skin Irrit. 2; Eye Irrit. 2; Aquatic Acute 1
- Classification source
- ECHA C&L Inventory via PubChem CID 5054 - hazard classes notified by at least 50% of companies; pictograms and signal word derived from those statements
2.2 — Label elements
- Hazard pictograms
- Irritant, Environmental Hazard
- Signal word
- Warning
- Hazard statements
- H302: Harmful if swallowed; H315: Causes skin irritation; H319: Causes serious eye irritation; H400: Very toxic to aquatic life
2.3 — Other hazards
- Other hazards
- May cause skin sensitization and is toxic if ingested or inhaled.
3.1 — Substance
- Name
- Resorcinol
- CAS No.
- 108-46-3
4.1 — Description of first aid measures
- First-aid measures after inhalation
- If this chemical has been inhaled, remove the exposed person to fresh air at once. If breathing has stopped, perform artificial respiration. Keep the person warm and at rest.
- First-aid measures after skin contact
- If this chemical contacts the skin, immediately wash the contaminated skin with water. If this chemical penetrates the clothing, immediately remove the clothing and wash the skin with water. If symptoms occur after washing, get medical attention immediately.
- First-aid measures after eye contact
- If this chemical contacts the eyes, immediately wash (irrigate) the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately.
- First-aid measures after ingestion
- If this chemical has been swallowed, get medical attention immediately.
4.2 — Most important symptoms and effects, both acute and delayed
- Symptoms relating to use
- Symptoms of exposure may include skin irritation, respiratory distress, and gastrointestinal discomfort.
4.3 — Indication of any immediate medical attention and special treatment needed
- General information
- Treat symptomatically. Show this safety data sheet to the treating physician.
5.1 — Extinguishing media
- Suitable extinguishing media
- Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
- Unsuitable extinguishing media
- Not specified
5.2 — Special hazards arising from the substance or mixture
- Special procedures
- Water may cause frothing.
5.3 — Advice for firefighters
- Protection during firefighting
- Do not enter fire area without proper protective equipment, including respiratory protection.
6.1.1 — For non-emergency personnel
- Emergency procedures
- Evacuate area and ventilate. Wear appropriate protective equipment.
6.3 — Methods and material for containment and cleaning up
- Methods for cleaning up
- Personal protection: P2 filter respirator for harmful particles. Do NOT let this chemical enter the environment. Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting.
6.4 — Reference to other sections
- Reference
- Not specified
7.1 — Precautions for safe handling
- Precautions for safe handling
- Handle with gloves and avoid contact with skin and eyes. Use in a well-ventilated area.
- Hygiene measures
- Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
7.2 — Conditions for safe storage, including any incompatibilities
- Storage conditions
- Separated from incompatible materials and food and feedstuffs. See Chemical Dangers.
8.2 — Exposure controls
- Hand protection
- Protective gloves (e.g. nitrile rubber)
- Eye protection
- Chemical safety goggles or safety glasses
- Skin and body protection
- Wear suitable protective clothing
- Respiratory protection
- Use appropriate respiratory protection if ventilation is inadequate.
9.1 — Information on basic physical and chemical properties
- Physical state
- Solid
- Colour
- White to pale pink
- Odour
- Faint, characteristic odor
- Odour threshold
- Not specified
- pH value
- Not specified
- Relative evaporation rate (butylacetate=1)
- Not specified
- Melting point
- 109.8 °C
- Freezing point
- Not specified
- Boiling point
- 280 °C, but volatilizes at lower temperature and is slightly volatile with steam
- Flash point
- 127 °C
- Auto-ignition temperature
- 1126 °F (608 °C)
- Decomposition temperature
- Not specified
- Flammability (solid, gas)
- Combustible
- Vapour pressure
- Vapor pressure = 1 mm Hg at 108.4 °C
- Relative vapour density at 20°C
- 3.79 (Air = 1)
- Density
- 1.278 g/cu cm at 20 °C
- Solubility
- In water, 7.17X10+5 mg/L at 25 °C
- Log Pow
- 0.80
- Viscosity, kinematic
- Not specified
- Viscosity, dynamic
- Not specified
- Explosive properties
- Not explosive
- Oxidising properties
- Not oxidizing
- Explosive limits
- Not specified
10.1 — Reactivity
- Reactivity
- Stable under normal conditions, but may react with strong oxidizing agents.
10.2 — Chemical stability
- Chemical stability
- Hygroscopic.
10.3 — Possibility of hazardous reactions
- Possibility of hazardous reactions
- Reacts with strong oxidants, ammonia and amino compounds. This generates fire and explosion hazard.
10.4 — Conditions to avoid
- Conditions to avoid
- Avoid contact with incompatible materials and excessive heat.
10.5 — Incompatible materials
- Incompatible materials
- Strong oxidizing agents, strong acids.
10.6 — Hazardous decomposition products
- Hazardous decomposition products
- When heated to decomposition it emits acrid smoke and irritating fumes.
11.1 — Information on toxicological effects
- Acute toxicity
- LD50 Rat oral 301 mg/kg; LD50 Rabbit dermal 3360 mg/kg; LD50 Mouse ip 215 mg/kg
- Skin corrosion/irritation
- H315: Causes skin irritation
- Serious eye damage/irritation
- H319: Causes serious eye irritation
- Respiratory or skin sensitisation
- Not classified (based on available data)
- Germ cell mutagenicity
- Not classified (based on available data)
- Carcinogenicity
- Not classified (based on available data)
- Specific target organ toxicity (single exposure)
- Not classified (based on available data)
- Specific target organ toxicity (repeated exposure)
- Not classified (based on available data)
12.1 — Toxicity
- Toxicity information
- Not specified
12.2 — Persistence - degradability
- Persistence - degradability
- Not specified
12.3 — Bioaccumulative potential
- Bioaccumulative potential
- Not specified
12.4 — Mobility in soil
- Mobility in soil
- Not specified
12.6 — Other adverse effects
- Environmental precautions
- Not specified
13.1 — Waste treatment methods
- Additional Info
- Dispose of contents/container in accordance with local, regional, national and international regulations.
14.1 — UN number
- UN-No. (ADR)
- UN 2876
- UN-No. (IMDG)
- UN 2876
- UN-No. (IATA)
- UN 2876
- UN-No. (ADN)
- UN 2876
- UN-No. (RID)
- UN 2876
14.2 — UN proper shipping name
- Proper Shipping Name (ADR)
- Resorcinol
- Proper Shipping Name (IMDG)
- Resorcinol
- Proper Shipping Name (IATA)
- Resorcinol
- Proper Shipping Name (ADN)
- Resorcinol
- Proper Shipping Name (RID)
- Resorcinol
14.3 — Transport hazard class(es)
- Transport hazard class(es)
- 6.1
14.4 — Packing group
- Packing group (ADR)
- III
- Packing group (IMDG)
- III
- Packing group (IATA)
- III
- Packing group (ADN)
- III
- Packing group (RID)
- III
14.5 — Environmental hazards
- Dangerous for the environment
- Not specified
- Marine pollutant
- Not specified
- Other information
- No supplementary information available
15.1 — Safety, health and environmental regulations/legislation specific for the substance or mixture
- 15.1.1 EU-Regulations
- Not specified
Resorcinol is primarily used as an analytical-grade reference compound in resorcinol chemistry research, particularly in the synthesis of various organic compounds. It serves as a precursor in the production of resins and adhesives, and is also utilized in the formulation of dyes and pigments. In the pharmaceutical industry, resorcinol is employed in the manufacture of antiseptics and skin treatments. Additionally, it finds applications in the rubber industry as a bonding agent and in the production of phenolic resins.
ISO 9001
ISO 14001
GMP
COA with every batch
- Batch Number
- AL-2026-AL1288B
- Manufacturing Date
- September-2026
- Expiry Date
- September-2031
- Molecular Weight
- 110.11 g/mol
| Test | Standard | Observed |
|---|---|---|
| Assay | 99% min | 99.5% |
| Melting Point | 110 °C | 110.5 °C |
| Solubility | Soluble in water | Fully soluble |
| Appearance | White to pale pink flakes | Pale pink flakes |
| Density | 1.27 g/cm³ | 1.26 g/cm³ |
The above product is expected to comply with AR (Analytical Reagent) grade specification.
Technical Data Sheet
| Grade | Assay/Purity | Melting/Boiling Point | Moisture/LOD | Residue on Ignition | Related Substances | Solubility |
|---|---|---|---|---|---|---|
| AR | 99% | m.p. 109.8 °C; b.p. 280 °C, but volatilizes at lower temperature and is slightly volatile with steam | Not specified | Not specified | Not specified | In water, 7.17X10+5 mg/L at 25 °C |
Related Products
View AllWhy buy from Alpha Chemika
What Our Scientific & Industrial Customers Say
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“One shop stop for all laboratory chemicals requirements.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“Exactly as advertised.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Alpha Chemika products are of excellent quality. Highly satisfied.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“From ordering to shipping, every course of action was smooth. Timely delivery.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“Completely satisfied with the products and services.”
“Speedy delivery, professional staff.”
“One shop stop for all laboratory chemicals requirements.”
FAQs
Common Questions About Laboratory Chemicals & Solutions
Find answers to common questions about laboratory chemicals, product selection, documentation, ordering, and technical support. Whether you are sourcing chemicals for research, testing, education, manufacturing, or industrial applications, these FAQs can help you make informed purchasing decisions.
Alpha Chemika offers a wide range of laboratory chemicals, reagents, solvents, and specialty products for research, testing, educational, pharmaceutical, and industrial applications.
Product selection depends on factors such as application, required purity, grade, specifications, and intended use. Our team can help you identify suitable products based on your technical requirements.
Yes. Relevant product information and technical documentation can be provided to help you evaluate products for quality, handling, compliance, and application requirements.
Yes. You can share your product list, required quantities, specifications, and delivery requirements with our team for a tailored quotation.
Yes. We support requirements from research laboratories, educational institutions, pharmaceutical companies, manufacturers, distributors, and other scientific and industrial organizations.
Connect with Us for Your Requirements
Have a specific product requirement or need help finding the right chemical for your application? Share your requirements with our team, and we will help you identify suitable products, specifications, quantities, and procurement options.
